Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
So for a 40g setup, how much of this stuff would I need. I think I can fit an 8x8x4 in the sump but is that overkill? That brick is over $50 so if I can use less I can spend that money on something else.
I run one in my 125 gallon reef its the 8x8x4 its been about 8 months and so far i havent seen any negatives.I'm thinking of adding these to my new build and would like to hear from others' experience. Are they worth it?
i cut a 4" block in half, one of which is in my 40 gallon frag tank sump. Don't skimp. If you can realistically fit a 4" block in the sump do it. It will be more benificial in the long run then to save a few bucks nowSo for a 40g setup, how much of this stuff would I need. I think I can fit an 8x8x4 in the sump but is that overkill? That brick is over $50 so if I can use less I can spend that money on something else.
You're absolutely correct which is why a thorough prefilter is essential. I run a wet dry with the spheres doing active filtration with a rollermat in line before the wet dry and it is perfect. After the wet dry my fuge combined with a 4" block consume all nitrates.These are more like rock. They have more surface area then rock though. I still use bio balls too, but instead of a trickle like a wet dry I keep them submersed in a sump instead. I think the problem with bio balls is junk making it through the filter and settling on them verses being submersed.
How expensive are thise rollermats? They really are cool.You're absolutely correct which is why a thorough prefilter is essential. I run a wet dry with the spheres doing active filtration with a rollermat in line before the wet dry and it is perfect. After the wet dry my fuge combined with a 4" block consume all nitrates.
Pricey at $400, but I don't think there is a better form of mechanical filtration out there.How expensive are thise rollermats? They really are cool.
Pricey at $400, but I don't think there is a better form of mechanical filtration out there.
I humbly admit defeat. [emoji33]oh, there is better ........ and much much more expensive
Profi Drum 45/20 or 45/40-- Rotary Drum Filter
http://www.bwkoi.com/ProfiDrum/ProfiDrum-ECO-p-229.html
$3,200-$4,500
Never replace another filter mat or sock ever again.
There is a thread on them leaching aluminum.
The marinepure bio balls work the same as live rock (once the bacteria is established )unlike ordinary bio balls that are made of plastic and aren't porous at all only trap all the stuff you don't wantI have read that the bio balls part of wet dry filter is not good because it can build up debris that can increase nitrates. How are these bricks different?
As far as surface area goes in comparison of the marine pure blocks or balls to live rock is live rock is limited to the amount of bacteria it can house (1/2 inch to an inch of live rock surface area is porous enough to house bacteria )the marine pure ceramic used is super light and extremely porous enough to house bacteria thru outThese are more like rock. They have more surface area then rock though. I still use bio balls too, but instead of a trickle like a wet dry I keep them submersed in a sump instead. I think the problem with bio balls is junk making it through the filter and settling on them verses being submersed.
I humbly admit defeat. [emoji33]
Koi people are ballers.The Koi guys put everyone to shame. Filters that cost $5,000. Fish that start at $1,200 and can easily go for $10-20,000
and the go to bio-media those guys use these days is MarinePure Cermedia blocks in giant trickle shower filters.

