A quick fwiw. On the orbits , at a full 1:1 w/b color ratio, they color temp at 2ok on the nose with the meter.But what percentage are your whites at?
All other leds I own will give an error message of 40k+.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
A quick fwiw. On the orbits , at a full 1:1 w/b color ratio, they color temp at 2ok on the nose with the meter.But what percentage are your whites at?
A quick fwiw. On the orbits , at a full 1:1 w/b color ratio, they color temp at 2ok on the nose with the meter.
All other leds I own will give an error message of 40k+.
Looks like green coralline to me!
It becuse most folks don't know what 20k looks like in actual fact.That's interesting. I thought 20k was pretty blue looking to the eye? Mine looks very white with both at 100%
I'm getting the other 2 t5 bulbs today and was planning on having 3 blue+ and 1 true actinic to offset the "white look" of my tank. I like the deep reef/deep blue look. Below is a pic of my tank not long after it cycled with both at 100%. I know it's a hard question to answer but do you think I would get the blue look with my bulb selection of 3 blue+ and 1 true actinic with my led?
![]()
I would still try turning down the whites if you can.I was running the whites/actinic at 100%. I was only doing that cause I have the Orbit marine led which has pretty weak par ratings. At 12" deep it only has 50-70 par. I have a 4 bulb t5 fixture now to supplement the led. I will be running all the lights now and will be using the led for moonlights after the t5 shuts off.
The light has no power. The t5 are going to over power it. I had the exact same set up.I would still try turning down the whites if you can.

