Good to know, I will try that. Lack of instructions is my only complaint with these lights. Imalso want to figure out how to run blues only for the first and last hour of the day.
Yes, Acclimation mode reduces the intensity by the percentage you specify for the time you choose. However this also slowly increases the intensity during that period and is meant to acclimate corals to the higher intensity slowly and automatically.
to do this just add your programming point at the specified time and set the intensities you want to achieve the desired color. I have mine set to 0% all channels until 5:00am. Then I slowly have the blues increase to about 15% over the course of several hours. Finally, they have a 3 hour ramp up to my full daytime intensity of 4 hours. After 4 hours, the cycle repeats (in reverse) util it gets back to 0% @ 11pm.
Thats what I can figure out, how to add a set point with just 1 or 2 colors/channels.
You can see my simple program here. I actually have a 4 hour ramp and 2 hour peak. In the bottom left corner of the screen you see the +, move the slider to the time you want your set point at and tap the +. Now set each channel to the desired intensity. If you only want blues, slide the other channels to 0% and leave the blues on. Once you have the settings you want, tap the check mark to save your settings.
Thanks. I will try it out.You can see my simple program here. I actually have a 4 hour ramp and 2 hour peak. In the bottom left corner of the screen you see the +, move the slider to the time you want your set point at and tap the +. Now set each channel to the desired intensity. If you only want blues, slide the other channels to 0% and leave the blues on. Once you have the settings you want, tap the check mark to save your settings.
