Just bought IceCap Algae Scrubber

  • Thread starter Thread starter RJ F.
  • Start date Start date
  • Tagged users None
Would wrapping the end of the screen pipe in Teflon tape prior to inserting it in the elbow help with the leaking?
 
Thank you for this. Makes alot of sense. I'm in contact with the rep now. He is looking into it. I'm def a little bummed. Even the holes that were drilled are all crooked and just seems like bad quality. The best part so far are the lights imo. I will be making mods to this for sure. Before I do I want to see what the rep says
The holes on the 302 scrubber weren’t lined up either, I believe that’s intentional but was very hard to work with. Personally I would recommend a turbo aquatic scrubber
 
I thi k teflon tape would work. But I'm not sure if the pipe is supposed to be removed for cleaning. That would mean every time I clean the screen or take it out I will have to wrap the threads back up. I would just glue it if it's supposed to be permanent. It has a quick disconnect on it so I'm waiting to hear what the deal is. I really appreciate the suggestions.

The holes arent like offset back and forth. It's like all over the place. I'll get a pic of it
 
Here's the holes

20190917_193429.jpg
 
I have one too and it leaked in the same spot. I spoke with Jeff at CoralVue and it can be glued. I'm assuming that allows you to adjust it to the best flow then glue it how you like. In the mean time I was able to stop the leaking by pushing in hardish and give it a little twist. It kind of seals it. Mine hasn't leaked in 2 days. Once I get some growth I'll check the flow again and glue it in. It sucks the pipe is glued to the unit.
 
I have one too and it leaked in the same spot. I spoke with Jeff at CoralVue and it can be glued. I'm assuming that allows you to adjust it to the best flow then glue it how you like. In the mean time I was able to stop the leaking by pushing in hardish and give it a little twist. It kind of seals it. Mine hasn't leaked in 2 days. Once I get some growth I'll check the flow again and glue it in. It sucks the pipe is glued to the unit.
Mine is too short to push it in any further. If I push it too far in it wont fit the cradle any more. I posted some pics of this.
 
put it in the cradle and push together. it's a bit awkward but push together kinda hard then you can adjust the spray bar while it's together and that gives it a good seal.

Like I said i'll end having to glue it but I want to make sure once algae starts growing the position makes sense. I've only had mine since Friday so there's nothing on it yet.
 
It's way too short. Even when it's in the cradle and I push it together, it just pushes back out. There's a whole 1/2 inch of travel still left in the fitting

20190916_180208.jpg
 
Ok so it sounds like they're sending me a replacement. That would be great. Thanks everyone for all the info. I will keep yall updated
 
Great news on the coming replacement!

Do you know what metric size pipe they use? Once you get your replacement, and if you feel like tinkering, I’d source the same size metric sch 40 pvc pipe and end cap and cut a slot pipe into it, just to see how it compares to the stock version. I’m a tinkering geek so I’d be all over this if I had one of those scrubbers! :D
 
Yup I plan to. Its 20mm I believe. Il have to do some research. This is also cool if i plan on up grading my tank
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top