KH Director

WWIII · Mar 28, 2018

Charts are working on the Connect app! So far, only a couple days, I have seen zero bubbles of any size in my reagent line with the thicker walled silicone hose. I wonder if I can make the line a little longer now that the volume is smaller? Won't push it till I let it run happy for a few weeks.

Dawsokj1988 · Mar 29, 2018

WWIII said:
Charts are working on the Connect app! So far, only a couple days, I have seen zero bubbles of any size in my reagent line with the thicker walled silicone hose. I wonder if I can make the line a little longer now that the volume is smaller? Won't push it till I let it run happy for a few weeks.

Awesome. I'm having to wait till the weekend before I can swap my tubing out. Glad to hear it's working well so far.

Buddah001 · Mar 29, 2018

Is there any chance that the time that is displayed showing last measurement will be local time or time that is shown in the GCC?

dragon99 · Mar 29, 2018

WWIII said:
Charts are working on the Connect app! So far, only a couple days, I have seen zero bubbles of any size in my reagent line with the thicker walled silicone hose. I wonder if I can make the line a little longer now that the volume is smaller? Won't push it till I let it run happy for a few weeks.

I guess you have a P4? You got me excited that I might be able to see a history with my SA Doser/KH combo. No joy for me though, still no chart.

On the good news side, 4 days and I don't see bubbles on the reagent line going into the KH. PFTE tubing and warmed/stomped reagent seems to have resolved that for me.

dragon99 · Mar 29, 2018

Buddah001 said:
Is there any chance that the time that is displayed showing last measurement will be local time or time that is shown in the GCC?

Mine shows the correct local time. Did you set the timezone in GCC? -5 is for central time

Ditto · Mar 29, 2018

I do like the graphs in the app:

I have had one blip in the last week and that was my fault.

I have not changed out my tubing but did change out my connectors with these because they kept falling off and this stopped it. Have yet to get any air thou.

Buddah001 · Mar 29, 2018

dragon99 said:
Mine shows the correct local time. Did you set the timezone in GCC? -5 is for central time

@dragon99 GCC shows the correct time. I was asking if the KH Director will show the time that is displayed in GCC not UTC time when the last measurement was taken

Buddah001 · Mar 29, 2018

dragon99 said:
I guess you have a P4? You got me excited that I might be able to see a history with my SA Doser/KH combo. No joy for me though, still no chart.

On the good news side, 4 days and I don't see bubbles on the reagent line going into the KH. PFTE tubing and warmed/stomped reagent seems to have resolved that for me.

@dragon99 i bought some PTFE tubing and I think it’s just to stiff. Similar to RO tubing. Found some thick walled silicone that I’m gonna try

Buddah001 · Mar 29, 2018

@Ditto where did you get those barbs?

dragon99 · Mar 29, 2018

Buddah001 said:
@dragon99 GCC shows the correct time. I was asking if the KH Director will show the time that is displayed in GCC not UTC time when the last measurement was taken

I always get the correct local time on the KH in GHL Connect app and on GCC.

The myghl.com page shows this the first time it pulls up, apparently GHL still hopes disco is making a comeback:

but if I refresh the page it shows the correct time

Ditto · Mar 29, 2018

@Buddah001

Amazon for the 1/4 to 1/8 which is on my KH now. They are tight fit and I am using the tubing GHL supplied without any issues with bubbles.

https://www.amazon.com/gp/aw/d/B017VTP2JQ/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1

I have on my other doser because it using a 1/8 tubing to my dosing container these below:

https://www.amazon.com/gp/aw/d/B00FD6FHOA/ref=ya_aw_od_pi?ie=UTF8&psc=1

I have to say both work great have had no issues with tubes falling off the doser

Buddah001 · Mar 29, 2018

dragon99 said:
I always get the correct local time on the KH in GHL Connect app and on GCC.

The myghl.com page shows this the first time it pulls up, apparently GHL still hopes disco is making a comeback:

but if I refresh the page it shows the correct time

@dragon99 @Ditto @WWIII this is weird my kh Director shows UTC time when the last measurement was taken.... any ideas

Buddah001 · Mar 29, 2018

Buddah001 · Mar 29, 2018

Last measurement was at 6pm tonight and that is what is diplayed

Buddah001 · Mar 29, 2018

WWIII · Mar 29, 2018

Buddah001 said:
@dragon99 @Ditto @WWIII this is weird my kh Director shows UTC time when the last measurement was taken.... any ideas

No idea man. I haven't been able to get my time right since we sprung forward. It's confusing to me all the options. Sorry. Lol.

Mine displays same as yours, 1 hour plus however long the test takes after the time I have set for test to take place. No matter what I do. Unless I switch to NTP time, then it displays the last measurement taken in december of 1912. Would be cool if they made it easier to set. I really don't get the summer time changing thing with number of days for it to occur either? Seems like no matter what I do, my time and/or date is off, and/or my last measurement time is 1 hour ahead.