My 400 gallon Pred tank build

Ed Menard

Community Member
View Badges
Joined
Aug 12, 2015
Messages
78
Reaction score
21
Location
Winnipeg
Rating - 0%
0   0   0
this was ten minutes after discovering that we couldn't fit the stand in the elevator or either stairwell.
So we had to take it apart outside right below my balcony)
 

Attachments

  • 400gal-1.jpg
    400gal-1.jpg
    5.8 MB · Views: 224
in my living room starting to reassemble the stand
 

Attachments

  • 400gal-2.jpg
    400gal-2.jpg
    2.2 MB · Views: 180
basic stand complete. this shot was taken from my balcony door facing towards the kitchen
 

Attachments

  • 400gal-4.jpg
    400gal-4.jpg
    2.4 MB · Views: 170
assembling the actual fishtank on top of the stand...he used 5/8th beveled glass that he precut and drilled at his workshop
 

Attachments

  • 400gal-5.jpg
    400gal-5.jpg
    96.8 KB · Views: 176
the stand with outer panels on and painted, sump installed and plumbing hooked in
 

Attachments

  • 400gal-6.jpg
    400gal-6.jpg
    1.5 MB · Views: 173
filling the tank...that rock is 150 pounds of dry rock,...the light fixture was just to illuminate for a picture as I have custom LED lighting installed in the canopy....also note that the doors are mounted and painted.
 

Attachments

  • 400gal-7.jpg
    400gal-7.jpg
    1.4 MB · Views: 178
a shot of my sump...water comes in at the 2 back corners and goes over rock ruble and bio balls. it then flows to the large chamber on the left which will hold the protean skimmer... it then flows by mangrove and carbon bag before going through the strainer and into the pump to return to the main tank
 

Attachments

  • 400gal-8.jpg
    400gal-8.jpg
    1.7 MB · Views: 190
this is my UV sterilizer...its mounted against the inside top of the cabinet
 

Attachments

  • sump-2.jpg
    sump-2.jpg
    1.5 MB · Views: 167
this shot shows my backflow valve and main shutoff from pump...also the power bar which hasn't been mounted yet in this picture
 

Attachments

  • sump-3.jpg
    sump-3.jpg
    1.4 MB · Views: 159
this shows the simple mounted light above the sump so mangroves will grow well)
 

Attachments

  • sump-4.jpg
    sump-4.jpg
    1.4 MB · Views: 158
a shot of the overflow...its of black glass which goes well with the entire back of the tank which we painted black)...also note that the inlet tube is 2 inch and has a hole drilled in the cap to prevent airlok
 

Attachments

  • sump-5.jpg
    sump-5.jpg
    1.6 MB · Views: 152
You have a 400g tank on a second floor? Is this an apartment or condo? Wow! Can't wait to see.
 
it is on a second floor apartment. in case anyone is now trying to do the math for this badboy i'll help you out)...

the stand empty is around 350 pounds...the tank empty was almost double that weight.

WITH water, rock, sump, misc equip, top canopy and lights, it weighs in at...just under 3800 pounds.
 
storage side of stand...the power bar is now mounted to the outer side of the shelf support. the shelf itself is removable
 

Attachments

  • sump-6.jpg
    sump-6.jpg
    1.1 MB · Views: 161
sump tank with light on, covers on, and the automatic water adder hooked up...that float and line run directly to my RODI system
 

Attachments

  • sump-7.jpg
    sump-7.jpg
    1 MB · Views: 173

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top