My Version of a DIY paristaltic pump
- Thread starter Sisterlimonpot
- Start date
- Tagged users None
OP
OP
My latest version with a dual head. I dubbed it "cream cicle"
- Joined
- Apr 16, 2016
- Messages
- 9,848
- Reaction score
- 17,081
- Location
- Pleasant Hill, Concord
- What state or country do you live in
- California
looks awesome.My latest version with a dual head. I dubbed it "cream cicle"
OP
OP
Cream Cicle is set up for automatic water change. I have it running continuously at 11ml per minute. I had to increase the amperage to have the torque to pinch 2 tubes at the same time. Heat was a concern so the driver required active cooling hence the fan. I also used a stronger stepper motor that was capable of higher torque.
OP
OP
I just read through this entire thread again and boy what a journey. From using layered acrylic cut out with a laser to 3d printing parts and refining things even further.
a few months ago, I abandoned the complicated pump mechanism and simplified it to 2 stationary parts and the 2 part rotor. It is so much quieter and it doesn't require any adjustments.
It was a fun project, and I've made a total of 3 of them for various functions, with the looming release of the Ecotech Versa, the price in which it costs me to make one of my pumps, I could get a versa $20 cheaper. And their software interface is so much better than what I came up with.
Ending as I began, I learned sooo much from this project and I'm glad I stuck it out and I want to thank everyone for your comments and help along this fun journey.
Cheers!!!
a few months ago, I abandoned the complicated pump mechanism and simplified it to 2 stationary parts and the 2 part rotor. It is so much quieter and it doesn't require any adjustments.
It was a fun project, and I've made a total of 3 of them for various functions, with the looming release of the Ecotech Versa, the price in which it costs me to make one of my pumps, I could get a versa $20 cheaper. And their software interface is so much better than what I came up with.
Ending as I began, I learned sooo much from this project and I'm glad I stuck it out and I want to thank everyone for your comments and help along this fun journey.
Cheers!!!
- Joined
- Apr 16, 2016
- Messages
- 9,848
- Reaction score
- 17,081
- Location
- Pleasant Hill, Concord
- What state or country do you live in
- California
The pump looks awesome. I like the simplicity.I just read through this entire thread again and boy what a journey. From using layered acrylic cut out with a laser to 3d printing parts and refining things even further.
a few months ago, I abandoned the complicated pump mechanism and simplified it to 2 stationary parts and the 2 part rotor. It is so much quieter and it doesn't require any adjustments.
It was a fun project, and I've made a total of 3 of them for various functions, with the looming release of the Ecotech Versa, the price in which it costs me to make one of my pumps, I could get a versa $20 cheaper. And their software interface is so much better than what I came up with.
Ending as I began, I learned sooo much from this project and I'm glad I stuck it out and I want to thank everyone for your comments and help along this fun journey.
Cheers!!!
Epic Aquaculture
The artist formerly known as SawCJack00
- Joined
- Apr 23, 2017
- Messages
- 3,144
- Reaction score
- 11,385
- Location
- Surprise, AZ
- What state or country do you live in
- Arizona
Your skills are amazing Jimmy!
Guys, can you tell me which distance di you have between the frame and the rollers ? Because i'm getting dump trying to customize a pump found on thingiverse. inner diamter 2mm, outer diameter 4mm, i'm leaving 1.9mm gap between the frame and the rollers but the water doesn't move, probably i'm not squezing enough. If I reduce the gap, water moves, but the hose will wear out very fast (after 24 hours i saw silicon "dust" everywehere)
fabiosi
New Member
- Joined
- Jan 5, 2022
- Messages
- 1
- Reaction score
- 0
- Location
- Brasil
- What state or country do you live in
- Other International
Hi sisterlimonpot,My latest version with a dual head. I dubbed it "cream cicle"
Congratulations on the project.
Did you use IGEM firmware (https://github.com/iGEM-Aachen/Open-Source-Peristaltic-Pump)?
Thanks
