Noopsyche K7 mini 60w wifi

[N1tew0lf1212]

@N1tew0lf1212 hey I have a couple questions I was wondering if you could help me with. I just got my shipment in. 2 k7 minis for my 40gal breeder. I have zoas, palys, blasto, duncan, and gorgonian. I currently have it on lps but instead of 80 blue I put 60. But are these settings good? And I have alot of overspill with the lights. They are 10 inches above glass top but at late afternoon and night the entire room is blueish. Tia.

Here are my current settings was dealing with a nuisance algae break out so i have turned the white channel completely off. But hope this helps I am on lps as well but have modified there settings for my tank to look its best

 

[bgilson]

I would say see how everything reacts that will tell you. I personally have played with my % a lot over the last several months to dial it in just so i knew everything was happy. These lights are bright thats for sure. I would say for the light spill my personal friend and light tech guy for shades is in this posting and also has all his prints for sale on his website i will tag him in the post. He also works hand in hand with @noopsyche. I hope you have a very merry christmas. And if there is any other way i can help let me know. I am not a noopsyche jedi but have gotten pretty good with this light since acquiring it.

Thank you so much. Merry christmas

 

[bgilson]

Here is his website hope this helps. It has made a huge difference in my bedroom where my nano is....

ParlAquatics

3D Printed Aquarium products and custom design. Improve your experience with these easy to use solutions for common and specialty aquarium needs.

www.parlaquatics.com

Is there any discount codes lol. Im going to get the rim adapter as well lol.

 

[N1tew0lf1212]

Is there any discount codes lol. Im going to get the rim adapter as well lol.

Direct message the owner might be ableto help you out. @Projects with Sam is his name and 3d printing is his game

 

[bgilson]

Direct message the owner might be ableto help you out. @Projects with Sam is his name and 3d printing is his game

I found a 5% im good with that. Made my order. Thanks for your help. Ill leave you alone now lol. Merry christmas

 

[N1tew0lf1212]

I found a 5% im good with that. Made my order. Thanks for your help. Ill leave you alone now lol. Merry christmas

No problem at all I am here to help. And glad you were able to find what you were needing. Be sure to give @Projects with Sam a shout when you can i know he loves the feedback and appreciation

 

[TheReefDiary]

Website posted above and great pricing my guy @Projects with Sam is rock solid.

any idea on linking two lights?

 

[N1tew0lf1212]

any idea on linking two lights?

Actually going to be taking that adventure shortly just ordered 2 more for a frag build but let me look into a few things and i will get back with you shortly in the mean time..... @tbrown3589 have you had to link 2 lights yet?

 

[TheReefDiary]

Actually going to be taking that adventure shortly just ordered 2 more for a frag build but let me look into a few things and i will get back with you shortly in the mean time..... @tbrown3589 have you had to link 2 lights yet?

I have both but can't figure out linking them. can't even figure out linking two to my 2.4ghz. wants to override the original one.

 

[TheReefDiary]

Actually going to be taking that adventure shortly just ordered 2 more for a frag build but let me look into a few things and i will get back with you shortly in the mean time..... @tbrown3589 have you had to link 2 lights yet?

so far seems like I'm going to have to just do one lan one ap which is annoying.

 

[N1tew0lf1212]

so far seems like I'm going to have to just do one lan one ap which is annoying.

I will reach out to my contact i know a few people that i believe have done one master one slave technique. I will find this out asap and get back to you asap.

 

[N1tew0lf1212]

so far seems like I'm going to have to just do one lan one ap which is annoying.

Hope this helps something i found for the 140w series but should work with the minis

 

[N1tew0lf1212]

If it doesnt let me know i will get with my contact about this for the minis and see what i can find out....

 

[TheReefDiary]

If it doesnt let me know i will get with my contact about this for the minis and see what i can find out....

doesn't work never blinks green

 

[tbrown]

Actually going to be taking that adventure shortly just ordered 2 more for a frag build but let me look into a few things and i will get back with you shortly in the mean time..... @tbrown3589 have you had to link 2 lights yet?

I have the older models - non WiFi. I have linked two of the K7 V3 and 1 K7 Pro II on one remote but they don't require a master/slave setup.

 

[tbrown]

@Sleeping Giant are you running Noopsyche still? K7 Pro III or older?

 

[Sleeping Giant]

@Sleeping Giant are you running Noopsyche still? K7 Pro III or older?

k7 v3 140w

 

[Sleeping Giant]

2 lights sequence together at the same time on 1 controller, if I remember correctly, you can set up to 8 or so on one controller. no master or slave, both run on one schedule.

 

[Sleeping Giant]

at 9:46 in video

 

[bgilson]

I have both but can't figure out linking them. can't even figure out linking two to my 2.4ghz. wants to override the original one.

I followed the instructions that came with them. You have to get them on AP instead of LAN. Then you have to switch network. Then you add k7mini##### go back to the app and pick your sps,lps,s/l and click save. Then go back to switch network. Pick the other k7mini##### and do the same thing. Make sure when you are done you go back to your home wifi for normal usage of web and etc