ORP range?

[edindubai]

i run 440 to 460 orp

I'd like to get my levels up. I did notice when I added a couple of cap-fulls of Seachem Prime to the tank the orp reader dropped rapidly from 188 to 84 over about a minute. I presume it is a reducing agent to have that effect.

 

[WARCON]

all these numbers and I still don't know what the recommended level should be.... just got the APEX controller and have been doing reefing for 9 months now. I am not sure what ORP is. I understand what it is on the chemistry level but not sure what it does for a tank. What levels should it be at.... mines at 350 as I type. help please

 

[WARCON]

all these numbers and I still don't know what the recommended level should be.... just got the APEX controller and have been doing reefing for 9 months now. I am not sure what ORP is. I understand what it is on the chemistry level but not sure what it does for a tank. What levels should it be at.... mines at 350 as I type. help please

 

[Garry Redbourne]

Hi all I am going to run ozone in my reef tank , I was just wondering what is the right level for orp to be set at on my controller is it 200 or 400 been reading the last thew comments above , so any pointers please would be great

 

[Reefer Reboot]

For those asking, from my “readaholic” habits it looks like 200 to 450 seems to be the agreed upon acceptable range.

Mine had been at a constant 350 area until I did a partial water change. It shot up to around 450. I pulled the probe out the next day to clean it but still came back about the same.

 

[BluTang85]

Mine runs around 425-450 continuously

 

[Dr. Dendrostein]

what does your ORP range look like through out the day?

Can get to 350, with no skimmer and heavy feeding. NPS corals. Hyatt products. Forgot no refugium too

 

[saltwaterpicaso]

mine is 320 to 350 I used to run ozone and had it set at 400 my tank actually looks better without it that high granted when it was that high I never had to clean my glass I think the water was just to clean for lps that hight

 

[Calpoly2103]

Bump

Just placed my APEX ORP probe into my new cycling tank (day 13). It's reading 184.....is this normal for it to be so low? Is it because I'm cycling a new tank?

Thanks

 

[Dr. Dendrostein]

Bump

Just placed my APEX ORP probe into my new cycling tank (day 13). It's reading 184.....is this normal for it to be so low? Is it because I'm cycling a new tank?

Thanks

Did you calibrate first?

 

[Calpoly2103]

Did you calibrate first?

Umm... I need to double check the get started guide but I believe it said the orp doesn't need calibration. It only came with ph and conductivity calibration fluid

 

[OldManSea]

Umm... I need to double check the get started guide but I believe it said the orp doesn't need calibration. It only came with ph and conductivity calibration fluid

Don’t worry, it often takes a couple of weeks to achieve constant levels. Mine started low as well and over a month gradually reached 400 or so. The tank was 2 years old at that time. It runs at 380 - 410 very consistently. If I wash equipment with peroxide and rinse extensively prior to returning to the tank, ORP immediately falls to 250 or so then returns to 400 within a couple of hours. I do a 20% water change once a month which has essentially no effect on ORP.

 

[ibondy]

Agree with OldManSea, it take some time (3-4 weeks in my cese) for ORP probe to stabilize. Right now mine is showing between 310-330 durring the day. Number is not that important, you are looking at ORP trends. If you see a big drop in ORP reading, it is time to investigate. Never had a big jump on ORP readings.

 

[Dr. Dendrostein]

Umm... I need to double check the get started guide but I believe it said the orp doesn't need calibration. It only came with ph and conductivity calibration fluid

I should of wrote, did you check for accuracy with a calibration solution? Before adding to tank.

 

[Calpoly2103]

I should of wrote, did you check for accuracy with a calibration solution? Before adding to tank.

How would you do that with an ORP probe? Neptune doesn't provide any solutions to calibrate or check for accuracy that i'm aware of...

 

[Dr. Dendrostein]

How would you do that with an ORP probe? Neptune doesn't provide any solutions to calibrate or check for accuracy that i'm aware of...

You check accuracy, to get an idea on how well calibrated

 

[Calpoly2103]

You check accuracy, to get an idea on how well calibrated

Excellent, this is what i was looking for. Thank you for sharing.

I can use this solution with Neptune ORP probe? is there an option in the calibration menu for it to calibrate at 400 ORP....?

 

[Arc Flash]

Had a near crash on my main tank, everything that could have been wrong was....long story short..my daughter came early so, had to spend time at the hospital..and in that time..the ATO failed..dosing pump failed and had 2 fish die..and they stayed in there for days...
Did a 15gal. water change and my ORP went down to 128..and after making things right, numbers have stabilized and ORP is now back to its normal spot of 414 ORP

 

[mitch91175]

all these numbers and I still don't know what the recommended level should be.... just got the APEX controller and have been doing reefing for 9 months now. I am not sure what ORP is. I understand what it is on the chemistry level but not sure what it does for a tank. What levels should it be at.... mines at 350 as I type. help please

Do not chase a number essentially. Observe your tank and in due time you will see what ORP means for your tank. I noticed mine drops when my nutrients aren't right, but that could just be a guess since I am not a scientists. I notice less algae in my tank when mine is closer to 400 (doesn't mean that'll be the case in your tank). Just my experience from what I have observed. Also my water is clearer the higher my ORP.

 

[ca1ore]

Monitor ORP if you want (I do because I'm OCD) but it's mostly useless - in 25 years of tracking it, I have yet to have an instance where any kind of intervention was required (even when I still ran ozone). Every now and then the number falls significantly, I run around like a headless chicken only to find ….. nothing. Almost better to just not measure it - which I would do except my Apex has the probe ….. sigh.