OP
OP
Firmware version reads 1.4aOK
Pacific Sun Kore 5th Doser Users Thread
- Thread starter BfishLpond78
- Start date
- Tagged users None
OP
OP
Have tried all that, after I set the dose schedule and select save. Is there anything else I need to do? I set the first dose for a minute ahead of the current time so I can see if it properly doses...am I missing something?
OP
OP
Did both the software and firmware
OP
OP
My interface is different than yours, but the channel is on and beep dose is on.
- Joined
- May 27, 2013
- Messages
- 2,002
- Reaction score
- 747
- What state or country do you live in
- Texas
I have the windows version. I guess mac doesn't have that option. let me see if I can find some images of the mac version.
My interface is different than yours, but the channel is on and beep dose is on.
- Joined
- May 27, 2013
- Messages
- 2,002
- Reaction score
- 747
- What state or country do you live in
- Texas
Did you click read first to get your calibration from your doser?
My interface is different than yours, but the channel is on and beep dose is on.
OP
OP
Ok so I got it to dose. Now I wanted to see how it would react to changes. So I changed it from 10mls daily to 100...saved it but it's still stuck on previous dosing amounts.
PS the issue is I was still connected to the unit via Bluetooth. Didn't know you had to disconnect for changes to run. Still can't change though
PS the issue is I was still connected to the unit via Bluetooth. Didn't know you had to disconnect for changes to run. Still can't change though
OP
OP
I do hit read and it tells me the amount it will dose...but it's still stuck on the 10ml amount vs the 100ml's I changed it too.
I changed it from 12 doses to 5 and it registered that just not the volume change.
I changed it from 12 doses to 5 and it registered that just not the volume change.
- Joined
- May 27, 2013
- Messages
- 2,002
- Reaction score
- 747
- What state or country do you live in
- Texas
Make sure you click READ first to bring in saved data, then make changes. Click SAVE. Also, make sure the the day of the week is checked the Advanced Dose slide like below. Click READ to bring in the saved data then SAVE after checking the appropriate day.
Also, I don't think the issue was that you were still connected to the bluetooth; i believe you left the pump in calibration mode. Exiting the connection made it leave calibration mode.
OP
OP
So I start the application...hit READ...it brings back:
Daily Dose - 100.00ml
Dose time - one minute ahead of current
# of doses per day - C5
Per Dose - 20.00ml
But the read out on the unit says 2.0ml still but at 5 doses
Daily Dose - 100.00ml
Dose time - one minute ahead of current
# of doses per day - C5
Per Dose - 20.00ml
But the read out on the unit says 2.0ml still but at 5 doses
OP
OP
Tried it 99ml and it only dosed 1.98ml
OP
OP
No luck...same issue. Will try the other pumps in the AM. Maybe something is different about the first pump?
OP
OP
The only thing it's not saving is the amount of total volume to be dosed daily. Everything else gets updated.
OP
OP
So all other pumps accept changes except for the first pump
