Red sea g2 250 problems

[OctaviusBrine]

a bit unsure of what you mean, are you thinking of the connection to filterrol? the wheel on the gate valve hits the door, so a solution must be found. The glue....kept waiting 8 hours, worked like a dream, no leak

Ah I see what you mean now. Loosen it at the bulk head and twist the whole pipe more towards the back. Mine fit with no modification.

 

[klavmaister]

Ah I see what you mean now. Loosen it at the bulk head and twist the whole pipe more towards the back. Mine fit with no modification.

Thx big time! Worked perfectly

 

[OctaviusBrine]

Thx big time! Worked perfectly

Awesome happy to help!

 

[Jaycee1964]

I just posted about this best thing I’ve done yet!

That's slick! Can i have a parts list?

 

[OctaviusBrine]

That's slick! Can i have a parts list?

Sure I’ll see if I can find the post that I posted it on.

 

[OctaviusBrine]

There are two ways to do it.

First way is the way I did it you will need
1) 1” spears slip to slip gate valve
2) 32mm to 1” slip connector
3) 1” pvc pipe
4) 1” union optional I would recommend
I have mine hard plumbed into reef mat so I needed a 90 degree fitting as well. I can walk you through that if you have one.

Second way you can go is use a different slip I’ll attach another pic that shows you that way.

 

[OctaviusBrine]

Here is the other way I didn’t go this route.

 

[OctaviusBrine]

@Jaycee1964 let me know if you have any questions.