Return pump

alan j t

Active Member
View Badges
Joined
Sep 1, 2015
Messages
153
Reaction score
45
Location
Reno nv
Rating - 0%
0   0   0
Hi all, my marine innovative return pump took a crap.tank is not even a year old yet!!even the ato sucks. Any way I'm done with innovative marine all the way.the tank is a 40 and I need to replace the pump. Any suggestions?
 
What is your budget? You can get a mag drive or a fancier pump like the ecotech marine vectra.

I've always like the ehiem pumps, the 1260 would work well on a 40b
 
Also look in too the waveline dc pumps
 
Last edited:
I'll check into those pumps you reccomend. Its a 40 but the tank is a display not a breeder,so it's really wierd .the sump is in the rear of tank and it looks like it's considered as water volume too.
 
You will need the measurements of the actual pond but if it's got to fit into a small back compartment.

Can you post the dimensions?
 
You will need the measurements of the actual pond but if it's got to fit into a small back compartment.

Can you post the dimensions?
That is the nice thing about dc pump, you can control the speed/gallons per hour.
 
measurements of the actual pond

Wow....that's simultaneously the worse AND most creative spellcheck I've ever seen! :mad::p

POND = PUMP

You need the dimensions of the pump so you can make sure the new one fits in the compartment.

thing about dc pump, you can control the speed/gallons per hour.

I'd use a DC pump if I already had one.

But if I'm buying a return pump I don't quite see the use-case for it. You only set the flow once in most cases. Also, an AC pump should last longer.
 
Wow....that's simultaneously the worse AND most creative spellcheck I've ever seen! :mad::p

POND = PUMP

You need the dimensions of the pump so you can make sure the new one fits in the compartment.



I'd use a DC pump if I already had one.

But if I'm buying a return pump I don't quite see the use-case for it. You only set the flow once in most cases. Also, an AC pump should last longer.
Where are the feed buttons on AC pumps.. so bummed about that!
 
Wow....that's simultaneously the worse AND most creative spellcheck I've ever seen! :mad::p

POND = PUMP

You need the dimensions of the pump so you can make sure the new one fits in the compartment.



I'd use a DC pump if I already had one.

But if I'm buying a return pump I don't quite see the use-case for it. You only set the flow once in most cases. Also, an AC pump should last longer.

True, after you get your sump return set, were you like the flow you my not use the speed control again. The benefit though is that you do not have to purchase a specific pump for GPH or brand. DC pumps tend to last longer that AC also.
 
Like I said, I'm not anti-DC pump...I'd use one if I had one already...just don't see the use-case as a return pump if I'm spending new money.

Where are the feed buttons on AC pumps.. so bummed about that!

:D

A "feed button" has never entered the equation nor has it ever been a problem not having one on the return pump. That's a good thing to bring up.

I don't think I would ever use that as a criteria for a return pump.

There are two things that matter in a return pump: reliability and reliability. :)

Worrying about feeding is a separate issue.

In my case, I don't shut off my return pump....just the skimmer. The skimmer is on my Reefkeeper Lite which has custom "Standby" modes for things like feeding.

Before I had a controller the skimmer was on a DJ-style power strip (individual On/Off switches per outlet) and I just shut it off as needed.

DC pumps tend to last longer that AC also.

I'm not sure of the basis for saying that since DC pumps have only been on the market a short while and the track record when you consider all DC pumps hasn't been stellar.

On the other hand, I have AC pumps older than Reef2Reef. Probably older than some of its members. :) ;) :p
 
Like I said, I'm not anti-DC pump...I'd use one if I had one already...just don't see the use-case as a return pump if I'm spending new money.



:D

A "feed button" has never entered the equation nor has it ever been a problem not having one on the return pump. That's a good thing to bring up.

I don't think I would ever use that as a criteria for a return pump.

There are two things that matter in a return pump: reliability and reliability. :)

Worrying about feeding is a separate issue.

In my case, I don't shut off my return pump....just the skimmer. The skimmer is on my Reefkeeper Lite which has custom "Standby" modes for things like feeding.

Before I had a controller the skimmer was on a DJ-style power strip (individual On/Off switches per outlet) and I just shut it off as needed.



I'm not sure of the basis for saying that since DC pumps have only been on the market a short while and the track record when you consider all DC pumps hasn't been stellar.

On the other hand, I have AC pumps older than Reef2Reef. Probably older than some of its members. :) ;) :p
So true you can never go wrong with an AC centrifugal pump
About the only thing to fail are the seals
 
I have a Mag 9.5 for my return and has been going strong for over 15 years. I have never had a problem and it has been thru 4 aquarium upgrades. I just replaced the impeller for pure maintenance and the original was still working fine. I also have a Mag18 for my skimmer that is the same age. I agree with the most important thing is reliability. ..... I hope I did not jinks myself by posting this. Lol
 
I used to use the mag drive pumps and swore by them, until I got a DC pump. I like the flexibility to be able to adjust the flow if I need to and since I run my reactors with my return this was an even better option. But the things that made me completely love my DC pump is the heat factor and how quite it is. My temp was 79-80 degrees with my mag 7 and other pump to run my reactors and now that I run just the DC pump is 77.4-77.9.
 
@mcarroll @twilliard @azreef and @R_C Now you guy are rolling with suggestions. :)

I like the older guy comment @mcarroll :D
@R_C I like how my DC pump is also very quite. My Mp40 is the loudest thing on the system.

Back to making filter socks
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%

New Posts

Back
Top