RODI sat still for three months, still okay?

Jakepen

Few beers and I'll frag anything...
View Badges
Joined
Feb 2, 2016
Messages
2,245
Reaction score
706
Location
Michigan
Rating - 0%
0   0   0
So I have my water station in my garage, and 90 gallons of RODI that has been sitting in my brutes untouched for about three months. Going to start cycling my tank, and I open up the brutes and see a lot of stuff floating in them. A ton of small brown pieces at the bottom, kind of looks like diatoms, clumped up. Is it safe to use, or should I dump it?
 
So I have my water station in my garage, and 90 gallons of RODI that has been sitting in my brutes untouched for about three months. Going to start cycling my tank, and I open up the brutes and see a lot of stuff floating in them. A ton of small brown pieces at the bottom, kind of looks like diatoms, clumped up. Is it safe to use, or should I dump it?


Was there anything besides rodi ever stored in the containers? Saltwater before? Does it smell? Do u have a tds meter?
 
Was there anything besides rodi ever stored in the containers? Saltwater before? Does it smell? Do u have a tds meter?
No they were brand new. I don’t have a tds meter for some reason, I have the strips. Was thinking maybe throw a filter sock over the hose I’ll use to drain the RODI into the tank, catch any debris...
 
No they were brand new. I don’t have a tds meter for some reason, I have the strips. Was thinking maybe throw a filter sock over the hose I’ll use to drain the RODI into the tank, catch any debris...


Yeah technically rodi can be stored a long time, if not indefinitely and is good to use. Not sure what is floating around in th cans? Maybe test it for phosphate and ammonia if you have those test kits, but I would think it would be ok? Then again, if you have an rodi setup maybe just make new. I dunno? See what some other guys/gal think.
 
Yeah technically rodi can be stored a long time, if not indefinitely and is good to use. Not sure what is floating around in th cans? Maybe test it for phosphate and ammonia if you have those test kits, but I would think it would be ok? Then again, if you have an rodi setup maybe just make new. I dunno? See what some other guys/gal think.
Only reason I’m tempted to use that water is I’m currently scaping my tank, would be nice when I’m finished, to have it half full just for some cushion in case anything falls.
 
No pvc or metal fittings inside the actual container to leach anything?
 
No pvc or metal fittings inside the actual container to leach anything?
Yeah pvc, it’s plumbed so there are a couple pvc pipes.

59B650CE-6A4C-4650-909F-F7BFE4BE4DAB.jpeg
 
Maybe pick up a copper test just to be safe?
 
Pvc can leach copper in some circumstances something about the production process
 
Hard to get a picture of it. Maybe I’ll just use this water to rinse my sand with. Has no smell to it.

34DB898F-87D1-4CEA-8CDA-62BE070A525F.jpeg
 
I would test it with a TDS meter, but honestly 90 gallons is not a lot of water in the grand scheme of things and if you don't have a method of testing then dump it and make new water. If is really not worth taking a risk. Dump the water clean the barrels with vinegar and start new.
 
I agree Freddy. Would it be safe to use to rinse my new sand with, or should I just use tap?
 
I would test it with a TDS meter, but honestly 90 gallons is not a lot of water in the grand scheme of things and if you don't have a method of testing then dump it and make new water. If is really not worth taking a risk. Dump the water clean the barrels with vinegar and start new.

Yes, and also suggest checking your RODI system for proper function, if you haven't done so recently. Optimally, you should check TDS before and after the membrane, and final product after the DI resin. Also pressure. If your system isn't working well, little point in making more water with it until that's fixed.
 
Right I agree. I did just change the resin and filters in it not long ago
 
I would 100% use it for many reasons.
#1 it’s for the tank cycling
#2 I have rinsed mold smelling sand that has turned grey and smells like garbage with tap water and am using that sand today
#3 it’s unlikely anything that’s gonna harm the tank is in that water
#4 I arguably have had RODI water sitting in the same brute containers for over a year cuz I never fully drain and or rinse out my brute bins they always have rodi water in them

Good luck!
 
I would 100% use it for many reasons.
#1 it’s for the tank cycling
#2 I have rinsed mold smelling sand that has turned grey and smells like garbage with tap water and am using that sand today
#3 it’s unlikely anything that’s gonna harm the tank is in that water
#4 I arguably have had RODI water sitting in the same brute containers for over a year cuz I never fully drain and or rinse out my brute bins they always have rodi water in them

Good luck!

Regarding point 4- everytine you fill the cans, your diluting out the older stuff, so that’s not really applicable.
 
Right I agree. I did just change the resin and filters in it not long ago
Thought so, they look very clean in that photo. Too bad it's not November, a 3-sensor inline TDS meter and pressure gauge from BRS would make great Christmas gifts. Birthday coming up perhaps? :)
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top