Seam Failure?

iMi

Well-Known Member
View Badges
Joined
Feb 13, 2021
Messages
636
Reaction score
1,034
Location
Chicago, IL
Rating - 0%
0   0   0
I just noticed what looks like a seam failing in the lower-left corner of my RedSea Nano. Has anyone seen a seam failing and does it look like this?
IMG_0657.jpeg
IMG_0658.jpeg
 
Can you post white pics, circle area in question.
 
Here are better photos

F1277F42-0925-4171-B5EB-CA624ABDB34A.jpeg

there does appear to be some salt creep in the corner where the silicone color is different. Mostly in the leveling mat but I probably wiped anything beyond that away when cleaning

DC33264A-6254-4F5B-A577-5D1DD0235F98.jpeg
 
Looks like typically poor finish on RS tanks. Unless you see salt creep, moisture or sudden water loss, keep an eye on it and do send pic to Red sea so you have something documented with them
 
Definitely looks suspect…. If you’re seeing salt creep then it’s only a matter of time before it gets worse. I’d contact Red Sea asap
 
Definitely looks suspect…. If you’re seeing salt creep then it’s only a matter of time before it gets worse. I’d contact Red Sea asap

I just did. In decades of keeping all sorts of tanks, I've never had one leak. I guess my number is up. Is this a true emergency? Any danger the pannel will fail catastrophically?

The tank is about a year old by the way. Someone I know asked that question.
 
If you’re worried about a catastrophic failure you can try a piece of tape to hold it tight till you hear back from Red Sea
 
ratchet straps, one high ,one low.JUST SNUG.
would not add tape until after you speak w RS.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top