Stevo's Profilux 4 - Ultimate Set Build Out

Neptune
Jump to Last
I'm running the latest version of GCC, and installed the latest firmware that came included with it. If I hit X and then immediatly hit the down arrow, I can sometimes get into the settings display menu (sometimes), but most of the time it just pops up the start 1-4 page. Also, when I do get into the settings menu, if I hit X to leave any of the specific settings pages I've entered, it will pop up the "start 1-4" page again lol. I know you probably imagine some old dude smashing buttons, but I assure you that's not the case.
 
Chewy.com
Dawsokj1988 said:
I'm running the latest version of GCC, and installed the latest firmware that came included with it. If I hit X and then immediatly hit the down arrow, I can sometimes get into the settings display menu (sometimes), but most of the time it just pops up the start 1-4 page. Also, when I do get into the settings menu, if I hit X to leave any of the specific settings pages I've entered, it will pop up the "start 1-4" page again lol. I know you probably imagine some old dude smashing buttons, but I assure you that's not the case.
Click to expand...
Message me direct please. I'll be happy to assist.
 
Thanks bud, I've messaged you. I'll make sure to post any fixes to this publically for anyone else having the same issue.
 
AS
Dawsokj1988 said:
I'm running the latest version of GCC, and installed the latest firmware that came included with it. If I hit X and then immediatly hit the down arrow, I can sometimes get into the settings display menu (sometimes), but most of the time it just pops up the start 1-4 page. Also, when I do get into the settings menu, if I hit X to leave any of the specific settings pages I've entered, it will pop up the "start 1-4" page again lol. I know you probably imagine some old dude smashing buttons, but I assure you that's not the case.
Click to expand...

I got in this loop a couple of times after calibration and eventually got out of it. I think that some combination of the UP arrow and the "X" got me out of it. Hard to say. Sounds like you are in a different loop.
 
cbear44 said:
I got in this loop a couple of times after calibration and eventually got out of it. I think that some combination of the UP arrow and the "X" got me out of it. Hard to say. Sounds like you are in a different loop.
Click to expand...

I was wondering last night if there are "hidden" factory settings that are accessed by button combinations. My ATI powermodule is like this and I accidentally made the increments jump a lot with a single push of a button. I dont like it...I want it to move 001 and the value moves 010. Its like button sensitivity was increased. Not saying this is how the P4 is.
 
WWC
Can anyone confirm/deny if there is maintenance being done on myghl.com? Last 2 days its been on the fritz for me.
 
I've had the same issue with myghl. There's a post on the GHL forums under MYGHL that talks about maintenance being done on the cloud servers, but that was a few weeks ago. I think they're still working on it. Are you getting the server side error?
 
Orphek OR3 reef aquarium LED bar
Dawsokj1988 said:
I've had the same issue with myghl. There's a post on the GHL forums under MYGHL that talks about maintenance being done on the cloud servers, but that was a few weeks ago. I think they're still working on it. Are you getting the server side error?
Click to expand...

Yeah its been weird, and I just assumed this was going on.
 
Seems to be working now. I see something new added. A connectivity bar to show us signal strength.
 
Everyone's gotten further than I have, I'm still sitting here trying to figure out how to connect to a computer on ghl control center
 
Deltec
Well the little signal bar lets us know that at least they're working on it!
 
Thanks everybody for getting back on to let me know its not just me. I was able to get in this afternoon and I was able to see the dashboard.
 
ncaldwell said:
Everyone's gotten further than I have, I'm still sitting here trying to figure out how to connect to a computer on ghl control center
Click to expand...

Sounds like you have GCC software installed and running on the computer, and you have the P4 plugged in. Do you have the USB cable connecting the computer and P4? If yes, youll need to go to "devices", "administration", "new", select the Profilux 4.

Then do the connection settings. Com1, 9600 baud, check rs232/USB, device address 1, timeout 5000.

Click save. Now click on the profilux 4 listed in the lower left. Click connect.

Note - The com # relates to what USB slot your using.
 
Last edited:
stevo01 said:
Sounds like you have GCC software installed and running on the computer, and you have the P4 plugged in. Do you have the USB cable connecting the computer and P4? If yes, youll need to go to "devices", "administration", "new", select the Profilux 4.

Then do the connection settings. Com1, 9600 baud, check rs232/USB, device address 1, timeout 5000.

Click save. Now click on the profilux 4 listed in the lower left. Click connect.
Click to expand...

It won't be Com1 for everybody. Mine is on Com3, it just depends on which USB port the USB cable is connected to.
 
AS
Is MYGHL supposed to be read/write enabled now? Or is it still read only?
 
Neptune

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

Dinkins Aquatic Gardens
Top Shelf Aquatics
World Wide Corals
Tidal Gardens
Deltec
TCK Corals
Chewy.com
Nutramar Foods
New Posts
Back
Top