jsker
Reefing is all about the adventure
View BadgesStaff member
Super Moderator
Partner Member 2024
Excellence Award
Reef Tank 365
Article Contributor
Hospitality Award
Ocala Reef Club Member
R2R Secret Santa 2023
My Tank Thread
- Joined
- Apr 11, 2015
- Messages
- 25,008
- Reaction score
- 80,077
- Location
- Saint Louis
- What state or country do you live in
- Missouri
Thank you.Well i don't think it's very fancy lol. Sump is 60" x 24" x 14" and has 10" of water throughout give or take. It adds about 200L to the system with the display holding 500L and the full width overflow holding another 50L. So a total of 750L or 200 gallons in actual water.
Manual float ATO clamp broke 6 months ago but a quick grip clamp fixed that problem. Water goes through a 100 micron sock then must travel through baffles with two mesh bags in it. One is 500ml phos minus and the other is carbon, both changed monthly. Then under and up through 13 liters of matrix and 2 liters freshly added life bio fil. Then goes into frag section to the left which is half the sump and empty atm except for a couple of crazy fish and two frags.
The water then comes into the skimmer section with my 5yr old Deltec 1455 - i will update to the current model if and when this one gives up the ghost. Awesome set and forget skimmer at a very good price compared to many similar flashier brands. Skimmers are skimmers as long as you buy a decent one.
I have a hose drawing air from outside to feed the skimmer otherwise i get pH swings during winter ( now ) when the house is locked up and the house heating running all night at 23 degrees C - i don't like the cold.........
Where was i, so then it goes through baffles where i placed the other 3 liters of life bio fil in two mesh baskets i made so i can give them a good swish or take them out to clean in water change water etc - i'm making four more of these to place 6 liters of the other stones in so the big bed isn't so deep. I will put two where the mesh bags are atm, one in the skimmer section and one will replace the stacked plastic mesh baskets in the return section - those cable tied end to end with a lid cut in the top make one new swishable media holder.
Water then goes back to the display via an Eheim compact 5000 pump. I have an Eheim 300W heater sitting on top of the media but it doesn't do much with the house at 21- 23C all year............ i don't like to be hot either............
I drip alk daily from a plastic container holding 2 litres RO over 24 hours. The calcium goes in the ATO along with Mg.
Here you go Kevin![]()

keep us posted on the 80 build!;Snaphappy
I am just as excited to get may hands on the tests as you


