Thinking of Going T5, Have Some Questions

  • Thread starter Thread starter Shep
  • Start date Start date
  • Tagged users None
On ATI fixtures all bulbs run in pairs with 1 ballast driving 2 bulbs. So long as you take out both bulbs on a single ballast this would work. If you pull 2 bulbs from 2 different ballasts you will have 2 that won't fire as well.

This may be helpful if you are trying to do this:

ATI 48" 6x54W Powermodule T5 High-Output Fixture 2&5 1&3, 4&6

Hmm how come my powermodule only has two plugs? I figured it was a 2 lamp and a 4 lamp ballast. So there are (2) two lamp ballast on a channel then (one power cord)?
 
Another good reason to overkill on bulbs is if you're using a dimmable running the bulbs at 70% or something will increase the life of the bulbs. You could possibly get a bulb life of 18 months or so.
 
Hmm how come my powermodule only has two plugs? I figured it was a 2 lamp and a 4 lamp ballast. So there are (2) two lamp ballast on a channel then (one power cord)?

You are correct, 1 cord with 2 ballasts.
 
So how much does a 6 bulb light with bulbs in it weigh?

Depends which ATI you want.
I have the Hybrid 60" and 8 bulbs with LED's and man that fixture is heavy, not sure how much but close to 50lb.
 
I've always gone by the rule of one bulb for each 3" of distance from front-back.

18" in depth tank, for example a standard 75 gal 6 bulbs
24" depth, a standard 120 for example 8 bulbs

Seems to work well for sps. I have a 75 gal sps tank with a 6x54w dim able (that never gets dimmed btw) and I get about 300 on the sand bed. I love t5s and what they do for sps growth and form and would never go back to straight LEDs.
 
So in that case a 6 bulb would be ok?
 
So in that case a 6 bulb would be ok?

For a 40B, right? 16" wide? 6 bulb would be perfect. 36" fixture with 6 bulbs you could keep sps from side panel to side panel and waterline to sandbed ;-)
 
I've always gone by the rule of one bulb for each 3" of distance from front-back.

18" in depth tank, for example a standard 75 gal 6 bulbs
24" depth, a standard 120 for example 8 bulbs

Seems to work well for sps. I have a 75 gal sps tank with a 6x54w dim able (that never gets dimmed btw) and I get about 300 on the sand bed. I love t5s and what they do for sps growth and form and would never go back to straight LEDs.
That is the rule of thumb. But in my experience having extra bulbs has additional benefits. I have a 6 bulb on my 12" tank and it's much better than the 4 bulb I use to have on it.

Yes a 6 bulb will be fine, but I think you would be much happier with the two extra bulbs.
 
I have 3 tanks. A 75 gallon with a 48" ATI Sunpower 6 bulb and a 93 cube and 63 cube with Ecotech Radion XR30w Pro. I love the LEDs, great color. But in my experience, I have better SPS growth with the T5's. If you are going to go T5, I would recommend an ATI 36 inch.
 
The 40B is 36" x 18". So if you want, the 8 bulb fixture will fit - wall to wall. Is it overkill? Probably, unless you are going to be keeping SPS. I do like to have the option of going with more bulbs though. As mentioned above, you could also go with the dimmable ATI fixture. Just be sure to burn your bulbs in at full power for at least 50 hours before using the dimmer on them.
 
Well its official! I am getting a 36in 8 bulb fixture from the ATI sale thread. Good bye LEDs hello T5s. Soooooooooooooooo now onto bulbs. What combo?
 
This combo has worked well for me for ten years: in an 8 bulb fixture I use 4 ATI blue plus, 2 ATI actinic, one ATI coral plus (previously I was using an ATI aqua blue special until the coral plus was released) and an ATI purple plus (which replaced what I was previously using, the KZ Fiji purple when the ATI version was released).
 
All these dimensions and no mention of the hieght of tanks for different fixtures. Anybody with experience or a thread reference for the max depth these t5 fixtures work well on?

I have a large tank project with a 48" deep tank and curious if T5 can penetrate beyond 24"?
I am most likely going to use a mix of MH and LEDs but was thinking of possibly adding some t5s as well.
 
Well its official! I am getting a 36in 8 bulb fixture from the ATI sale thread. Good bye LEDs hello T5s. Soooooooooooooooo now onto bulbs. What combo?
Depends on what your personal preference is. Do you want more of a blue look or more of a white look? I bought extras of bulbs to allow me to figure out what combo I liked the best. So you could buy 5 blue plus, 2 purple plus, 2 coral plus, 2 pure actinic and 1 aquablue special to customize it to your liking. If you want the blue look skip the aquablue because it will definitely whiten the overall look.
This combo has worked well for me for ten years: in an 8 bulb fixture I use 4 ATI blue plus, 2 ATI actinic, one ATI coral plus (previously I was using an ATI aqua blue special until the coral plus was released) and an ATI purple plus (which replaced what I was previously using, the KZ Fiji purple when the ATI version was released).
That seems like a pretty good combo
 
I have the Innovative Marine SR-120 and considering switching to a T5/LED combo unit like the ATI or Aurora as well. Tank is 71in in length and 16in in depth. I can place the fixture at any height above the tank....what would you guys suggest? at 48in or 60in fixture? Also, 4 or 8 bulb? Much appreciated!
 
So here is the bulb combo I am thinking of going with, I want a touch of blue but not too much. What do you all think? Also should I use the Aquablue special or the True Actinic bulbs?
4 ATI Blue+
3 ATI Coral+
1 ATI Purple+
 
You will likely get a lot of different opinions on combinations. I don't have my ATI Powermodule (or new tank) yet, but this is what I am planning on using: 4 Blue Plus, 3 Purple Plus and 1 Coral Plus. But as someone mentioned earlier, might not be a bad idea to order extra bulbs so you can mix and match to get the desired look that you like.
 
When I ran exclusively ati bulbs I used a combo of blue plus and Coral plus. Seems like sps really like a purple bulb as well
 
Well lights and fixture will be here around Tuesday!
 
So here is the bulb combo I am thinking of going with, I want a touch of blue but not too much. What do you all think? Also should I use the Aquablue special or the True Actinic bulbs?
4 ATI Blue+
3 ATI Coral+
1 ATI Purple+
That should throw a ton of par with that combo. The overall look should be plenty white with that combo when all the bulbs are on. The ab special is a crisp white bulb and would pick up the par some and accelerate growth. The pure actinic would boost colors like green etc.
When I ran exclusively ati bulbs I used a combo of blue plus and Coral plus. Seems like sps really like a purple bulb as well
Ime sps do like the purple plus and it will bring out pink and red.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top