this flow good?

[stewy14]

this a repost, yes ik, just need some answers
its a jebao cwp5000 on lowest setting in 11 gal cube
Is this too much flow? And is the froggy looking fine?

 

[stewy14]

this a repost, yes ik, just need some answers
its a jebao cwp5000 on lowest setting in 11 gal cube
Is this too much flow? And is the froggy looking fine?

@admin. this should be in hardware right?

 

[stewy14]

how to I position it too? as in where should I put my wavemaker?

 

[Idech]

Video isn’t the best but it looks okay to me. You want it to sway gently in all directions.

 

[stewy14]

Video isn’t the best but it looks okay to me. You want it to sway gently in all directions.

where should I put it?(the video still buffering I think on yt)

 

[stewy14]

Video isn’t the best but it looks okay to me. You want it to sway gently in all directions.

and is the froggy moving around a lot bad or good?

 

[vetteguy53081]

this a repost, yes ik, just need some answers
its a jebao cwp5000 on lowest setting in 11 gal cube
Is this too much flow? And is the froggy looking fine?

Seems aggressive, drop it a little

 

[stewy14]

Seems aggressive, drop it a little

thats the lowest it goes
but can I move it to a better spot?

 

[lil sumpin]

and is the froggy moving around a lot bad or good?

You want it to sway gently in all directions. One directional flow will stress the frogspawn

 

[stewy14]

You want it to sway gently in all directions. One directional flow will stress the frogspawn

wdym by sway gently? how would I do that?

 

[lil sumpin]

Try moving the powerhead an inch higher and aim it at the surface of the water? That might allow for the flow to spread around a little more. It’s going to require a little experimentation before you get it right

 

[stewy14]

Try moving the powerhead an inch higher and aim it at the surface of the water? That might allow for the flow to spread around a little more. It’s going to require a little experimentation before you get it right

im thinking, since there are no settings besides how much flow it outputs(there is a ring that restricts water) and since its big, should I return and invest in another?(preferably under $70)any ideas?

 

[vetteguy53081]

thats the lowest it goes
but can I move it to a better spot?

You can aim it at a corner and create a lower gyre effect

 

[stewy14]

You can aim it at a corner and create a lower gyre effect

but the sand

 

[vetteguy53081]

but the sand

Dont aim it downwards and what type/brand is the powerhead

 

[stewy14]

Dont aim it downwards and what type/brand is the powerhead

its a jebao cwp5000

 

[stewy14]

im thinking to return the pump and get either of these:



just wanna know your opinions(rmbr its an 11.4 nano cube tank)

 

[stewy14]

im thinking to return the pump and get either of these:



just wanna know your opinions(rmbr its an 11.4 nano cube tank)

just put these into amazon:

hygger Mini Wave Maker Aquarium Magnetic DC Powerhead with LED Display Controller for Saltwater Tank, 1600 GPH Aquarium Water Circulation Pump 5 to 30 Gallon Black​

Jebao SLW Series Aquarium Fish Tank SINE Wave Flow Wave Maker Pump With Controller (SLW-10)​

Jebao SOW Wave Maker Flow Pump with Controller for Marine Reef Aquarium (SOW-8)​

Jebao Aquarium Wavemaker (SOW-4)​

Jebao SOW Wave Maker Flow Pump with Controller for Marine Reef Aquarium (SOW-3)​

 

[stewy14]

so... I am definitely going to return it, just gotta find out what wavemaker to buy , options are in last post

 

[vetteguy53081]

its a jebao cwp5000

This should be controllable. If too big, you can add screening around the back of pump which will reduce intake and flow rate