The 1/2in Kit that @Beau_B suggested above with the single 1/2in will work. it includes the 16.5mm adapter, some loc-line and the 1/2n RFG.
Wrong size dual nozzle
- Thread starter Carolina79
- Start date
- Tagged users None
OP
OP
Carolina79
Community Member
@Vivid Creative Aquatics thank you, and I’m sorry for the delay in replying! Life! So taking into consideration that I have a mighty jet 326GPH, please tell me what kits to buy? I do like the dual nozzle option. Thanks a lot.
Dburr1014
10K Club member
Did you know loc-line has 1/2 to 3/4 adapters? It would just snap ball to ball and get rid of the middle piece.
Opposite of what you need but I'm sure they would make the right ones probably in a different color.
Opposite of what you need but I'm sure they would make the right ones probably in a different color.
Last edited:
Will the mighty Jet pump fit in the the back of that tank? Not sure that it will without modification. But if you can, then for the best results I think i would suggest the single 1/2in RFG. That would produce the best and strongest punchy randomized flow for the amount for the GPH that pump can deliver.
Waterbox® Flow Kit with 1/2in Random Flow Generator® Nozzle – WBFK050 | Vivid Creative Aquatics
vividcreativeaquatics.com
If you don't want to run that pump at 100%, then you could also go with th dual 1/4in Kit. that would work well, and you may be able to get away with running that pump at around 75%
Ultimate Nano Tank Return Line Upgrade Kit – Dual 1/4in Flex-Series RFG | Vivid Creative Aquatics
vividcreativeaquatics.com
You'll also need the 16.5mm adapter for this kit to attach
16.5mm Modular Hose to 1/2in Loc-Line Adapter – FLEX | Vivid Creative Aquatics
vividcreativeaquatics.com
You could run dual 1/2in RFGs, but honestly, I think the result would be a bit underwhelming, since 320GPH is not really enough to get the full effect.
They do make them in black - in fact we stock almost the full in of Loc-Line adapters. they have 3/4in to 1/2, and 1/2in to 1/4in reducers. We also have the 3/4in to 1/2 and 1//2in to 1/4in Y reducers - lots of options.Did you know loc-line has 1/2 to 3/4 adapters? It would just snap ball to ball and get rid of the middle piece.
Opposite of what you need but I'm sure they would make the right ones probably in a different color.
Unfortunately though, the Waterbox plumbing is not directly Loc-Line compatible
OP
OP
Carolina79
Community Member
Thanks so much I’ll go online and order the single 1/2 RFG. I voided the warranty on the mighty jet by cutting off some thread and fitting it into the return pump chamber, works really well, I figured I didn’t pay much for it almost new on marketplace so I took the chance and It worked!Will the mighty Jet pump fit in the the back of that tank? Not sure that it will without modification. But if you can, then for the best results I think i would suggest the single 1/2in RFG. That would produce the best and strongest punchy randomized flow for the amount for the GPH that pump can deliver.
this kit comes with the 16.5mm adaper that you'll needWaterbox® Flow Kit with 1/2in Random Flow Generator® Nozzle – WBFK050 | Vivid Creative Aquatics
If you don't want to run that pump at 100%, then you could also go with th dual 1/4in Kit. that would work well, and you may be able to get away with running that pump at around 75%
Ultimate Nano Tank Return Line Upgrade Kit – Dual 1/4in Flex-Series RFG | Vivid Creative Aquatics
You'll also need the 16.5mm adapter for this kit to attach
16.5mm Modular Hose to 1/2in Loc-Line Adapter – FLEX | Vivid Creative Aquatics
You could run dual 1/2in RFGs, but honestly, I think the result would be a bit underwhelming, since 320GPH is not really enough to get the full effect.
