3d Printed Aquarium Parts Archive

[CWalters]

Does anyone by chance have an STL file for a varios 6 return pump intake screen? Mine broke and everywhere I have looked is out of stock.

 

[alabella1]

Can anyone mock up one of these?? I know many reefers swear by the Ranco Heater Controllers and these mounts look like they should be easy for those who are good at designing.

Hanger Bracket For Ranco Digital Temperature Controller

 

[Projects with Sam]

Can anyone mock up one of these?? I know many reefers swear by the Ranco Heater Controllers and these mounts look like they should be easy for those who are good at designing.

Hanger Bracket For Ranco Digital Temperature Controller

some measurements may be needed to size it properly. Like, for instance the dimension from center to center of the posts. the diameter of the posts, how far the come out from the plate and any other desired design direction like PETG color.

 

[Sleeping Giant]

love this

 

[DSmithZ28]

The link for the power brick mount is broken does anyone have one for a jebao power brick?

 

[Sleeping Giant]

I just found 7 items I want to get made up, awesome site.

 

[Sleeping Giant]

The link for the power brick mount is broken does anyone have one for a jebao power brick?

I saw that too

 

[Sleeping Giant]

now to get a 3d printer, or someone with one lol

 

[Sleeping Giant]

thanks, I'll pm some files. maybe get a cost?

 

[Sea Witch]

Looking for/Is there an Aqua Ultraviolet return adapter?.... something that allows the water to return to the tank without the noise of water hitting water

 

[BlueAntec]

Awesome list, thanks for compiling it. I did notice one of the listed bulk head tools had six different sizes in the files list. Looks like it could be a good one stop shop for Bulkhead removal tools.

• Bulkhead Nut Tool (1" bulkheads?) by @Zephrant

 

[SaltyDadDog]

https://cults3d.com/en/3d-model/various/frozen-fish-food-feeder Here is a frozen food feeder I made. Enjoy!

 

[Mschmidt]

I am "shamefully" looking for an urchin-sized cowboy hat. I tried resizing some from thingiverse, but they end up printing one layer thick and that just won't work for me.

 

[Mschmidt]

Ok, I wanted to try out replacing my filter socks with a roller... So I designed one. Haven't wet tested it yet but constructive comments always welcome.. It's here on Thingiverse: Rollermat Reef Filter

How wide is the body to this? my sump doesn't leave much room for anything that's not a 4" sock.

 

[EricR]

Does anyone know of a nice-looking, snail guard for float switch on Tunze nano Osmolator?
It comes with clear wave guard but the bottom is open and urchin can still manage to hold the float down from the bottom (((not often but has happened to me))).

*I could DIY something easily but willing to buy something nicer (cosmetically) if available since float is in DT

 

[Smokeshow]

Started printing the hanna checker holder based on Robs bz reef design. 25 hour print. This is alittle over 12 hours in

 

[Projects with Sam]

Check your slicer settings. did you get it to come in under 1kg of filament? hope you started with a fresh roll!
do you have a filament run-out sensor?

*happened to me*

 

[Mschmidt]

Started printing the hanna checker holder based on Robs bz reef design. 25 hour print. This is alittle over 12 hours in

I'd have it too but doesn't fit on my bed. And I want to change the reagent holes to match what I have. I'm glad he added the fusion file to the download!

 

[Smokeshow]

I got it to 572g. 10% fill. I shortened it a few mm and changed it for po4, no3 and alk. I do had a run out sensor as well

 

[Smokeshow]

26hr 38m and over 160meters of filament and its amazing


Thanks @RobB'z Reef