OP
OP
Acorral 250g cube(ish) reef
- Large Build
- Thread starter Acorral
- Start date
- Tagged users None
? 
OP
OP
Acorral
Active Member
A couple of iphone photos (sorry about the quality) of one of my acros, one from may 9th and another one from yesterday may 22nd...
13 days of color change and a little growth...
Before:
After:
13 days of color change and a little growth...
Before:
After:
Daniel@R2R
Living the Reef Life
- Joined
- Nov 18, 2012
- Messages
- 38,516
- Reaction score
- 67,449
- Location
- Fontana, California
- What state or country do you live in
- California
Beautiful photos!!Some photos of the new batch of coral frags, and some of the existing colonies I had:
OP
OP
Acorral
Active Member
Just rearranged the lights... insteqd of having them comming from the center I took them to the sides so the side view is well lot instead of full of shadows...
I measured PAR after that and it is 100 at the bottom, all acros receive 200-380
I guess I could use more light, maybe a t5 fixture on the middle? More leds of the same kind? Some par38 spots to the acro zones?
What would you do?
I measured PAR after that and it is 100 at the bottom, all acros receive 200-380
I guess I could use more light, maybe a t5 fixture on the middle? More leds of the same kind? Some par38 spots to the acro zones?
What would you do?
Daniel@R2R
Living the Reef Life
- Joined
- Nov 18, 2012
- Messages
- 38,516
- Reaction score
- 67,449
- Location
- Fontana, California
- What state or country do you live in
- California
+1 T5s down the middle.I would try T5s in the middle!
OP
OP
Acorral
Active Member
I would try T5s in the middle!
The thing that makes me hesitate about T5 is that they normally go mear the water surface... in this case they would need to go higher or they will be in the way of the leds... is it ok to have them higher ?
najer
Valuable Member
I did think about that, how high off the water are the slightly higher inside edges are the led panels?
I have a hybrid and it is about 8 inches off the water.
OP
OP
Acorral
Active Member
That's another option...
I like having that space for accesibility but once everything is set there is less need to be messing with the tank...
OP
OP
Acorral
Active Member
OP
OP
Acorral
Active Member
This is the steel base of the old aquarium.
We are taking out sole part of the legs to make it shorter.
I wil trim the old aquarium to half it's height and it will become a frag tank !!
We are taking out sole part of the legs to make it shorter.
I wil trim the old aquarium to half it's height and it will become a frag tank !!
najer
Valuable Member
At 10 inches I would go for it, with the leds you have already the T5s are a supplement and will help the higher part of the scape especially.
Timothy Butler
Active Member
- Joined
- Dec 23, 2016
- Messages
- 167
- Reaction score
- 31
- What state or country do you live in
- Michigan
I put two reef tanks in my basement walls so you can see three sides of each tank very attractive especially at night you love the ease if you have a laundry tub behind where your tank is I have one I mix all my water and make all my Rodi water you will love this and your friends and family will be ecstatic very cool be proud of the hobby that you have it takes time and patience I've been in it for 17 years and I learn something new almost every day always Google information given some people on here not informed or getting wrong facts so enjoy your new basement and your tanks and I'm sure you know the number one rule isolation tank mandatory isolate all new inhabitants for at least 10 days to see if they have disease or paths then you can knowingly put that Coral in your tank and no it's not going to kill everything I have seen people buy Coral right from the store put it in the tank and two days later everything's dead because they didn't want to isolate it for 10 days
OP
OP
Acorral
Active Member
I want to buy a dimable T5 lamp, saw ATI and Giesemann... any other brand you could recommend?
Meanwhile I installed a LED lamp I made some time ago.
The PAR measurements improved but not too much, but the looks improved greatly, better colors and less shadows.
The lamp has 81 LEDs divided in 9 channels, 4 different tupes of blue, 3 different types of UV, 2 types of white, 3 types of red and lime.
Will keep looking for a dimmable T5, either standalone or controllable with Neptune Apex... any suggestion is welcome !!
Meanwhile I installed a LED lamp I made some time ago.
The PAR measurements improved but not too much, but the looks improved greatly, better colors and less shadows.
The lamp has 81 LEDs divided in 9 channels, 4 different tupes of blue, 3 different types of UV, 2 types of white, 3 types of red and lime.
Will keep looking for a dimmable T5, either standalone or controllable with Neptune Apex... any suggestion is welcome !!
McMullen
Valuable Member
What is PAR at bottom now?I want to buy a dimable T5 lamp, saw ATI and Giesemann... any other brand you could recommend?
Meanwhile I installed a LED lamp I made some time ago.
The PAR measurements improved but not too much, but the looks improved greatly, better colors and less shadows.
The lamp has 81 LEDs divided in 9 channels, 4 different tupes of blue, 3 different types of UV, 2 types of white, 3 types of red and lime.
Will keep looking for a dimmable T5, either standalone or controllable with Neptune Apex... any suggestion is welcome !!
OP
OP
Acorral
Active Member
