OP
OP
ReefCartel
Well-Known Member
thanks bud
Finally starting up the new (In-wall) tank
- Large Build
- Thread starter ReefCartel
- Start date
- Tagged users None
OP
OP
ReefCartel
Well-Known Member
OP
OP
ReefCartel
Well-Known Member
Horizontal Saltwater Mixing Containers Arrived 
Last edited:
OP
OP
ReefCartel
Well-Known Member
The Horizontal tanks are both 35g. My plan was to mix Salt water in both containers about 65g circulating back and forth. but idk what do you think? The big container is 55g
143MPCo
ASSIST PROTECT DEFEND
Excellence Award
Photo of the Month
Article Contributor
Moderator Emeritus
Reef Squad Emeritus
- Joined
- May 14, 2012
- Messages
- 6,696
- Reaction score
- 8,295
- What state or country do you live in
- Connecticut
Okay this might not typically be the norm but I will put it out there....
I have two 35 gallon containers plumbed together in a mixing station, the pump is on the timer, on during the day, off at night... I change 1% of water in my display tank every day (this is not typical part) so I keep my system as stable as I possibly can... I know of others that have an automated way of doing the same thing over the course of the day (24 hours).
This is what it looks like:
My RO/DI feed the top container, I open the valve to gravity feed the lower one, add my salt, and check the specific gravity.... it has a heater inside it to bring it up to temperature... doing it that way changes 30 gallons a month (not a week) and has in part helped me get rid of a serious algae problem.
I have two 35 gallon containers plumbed together in a mixing station, the pump is on the timer, on during the day, off at night... I change 1% of water in my display tank every day (this is not typical part) so I keep my system as stable as I possibly can... I know of others that have an automated way of doing the same thing over the course of the day (24 hours).
This is what it looks like:
My RO/DI feed the top container, I open the valve to gravity feed the lower one, add my salt, and check the specific gravity.... it has a heater inside it to bring it up to temperature... doing it that way changes 30 gallons a month (not a week) and has in part helped me get rid of a serious algae problem.
Last edited:
OP
OP
ReefCartel
Well-Known Member
Nice. I have some questions for you. I also need some help planning before i drill the holes.
1. What pipe size are you using? and pump?
2. My horizontal tanks need to be side by side about 3 feet apart. What would be the best way to plumb them to circulate the salt water?
3. Would it be possible to see your Display Tank?
My plan was to gravity feed my Vertical tank into the left Horizontal tank then mix salt water into both bottom horizontal tanks by circulating them back and forth. make sense?
1. What pipe size are you using? and pump?
2. My horizontal tanks need to be side by side about 3 feet apart. What would be the best way to plumb them to circulate the salt water?
3. Would it be possible to see your Display Tank?
My plan was to gravity feed my Vertical tank into the left Horizontal tank then mix salt water into both bottom horizontal tanks by circulating them back and forth. make sense?
143MPCo
ASSIST PROTECT DEFEND
Excellence Award
Photo of the Month
Article Contributor
Moderator Emeritus
Reef Squad Emeritus
- Joined
- May 14, 2012
- Messages
- 6,696
- Reaction score
- 8,295
- What state or country do you live in
- Connecticut
3/4" and a mag drive 7 externally setup.
top down with a internal 45% elbow so the water spins like in a vortex.
wont really spin but hopefully you get the idea... lol
yes, The 150 Build:
https://www.reef2reef.com/forums/member-tanks/185699-5yr-young-150-work-progress.html
150 Tank Pic's:
https://www.flickr.com/photos/reefer...7648650015160/
Last edited:
143MPCo
ASSIST PROTECT DEFEND
Excellence Award
Photo of the Month
Article Contributor
Moderator Emeritus
Reef Squad Emeritus
- Joined
- May 14, 2012
- Messages
- 6,696
- Reaction score
- 8,295
- What state or country do you live in
- Connecticut
I used uniseals... from BRS great on rounded surfaces.
Last edited:
OP
OP
ReefCartel
Well-Known Member
Oooh nice set up. So Top down with a 45 inside the container?
For my 2 horizontal tanks side by side there is a 1-1/2" opening on the bottom which i converted to a 3/4" and added a 90 elbow to the two jugs. Heres a little drawing for a visual. I put a question mark at the pipe towards the top of the container because I want to make sure it will circulate since the pipe is Horizontal and no gravity. I can use a 1" pipe with Uniseal for that pipe if that would help.
For my 2 horizontal tanks side by side there is a 1-1/2" opening on the bottom which i converted to a 3/4" and added a 90 elbow to the two jugs. Heres a little drawing for a visual. I put a question mark at the pipe towards the top of the container because I want to make sure it will circulate since the pipe is Horizontal and no gravity. I can use a 1" pipe with Uniseal for that pipe if that would help.
OP
OP
ReefCartel
Well-Known Member
More Water volume for saltwater for larger water changes.
I tried to utilize all the extra space i had for storing more water. The Vertical Tank will also be the RODI Reservoir/ATO
I tried to utilize all the extra space i had for storing more water. The Vertical Tank will also be the RODI Reservoir/ATO
Last edited:
143MPCo
ASSIST PROTECT DEFEND
Excellence Award
Photo of the Month
Article Contributor
Moderator Emeritus
Reef Squad Emeritus
- Joined
- May 14, 2012
- Messages
- 6,696
- Reaction score
- 8,295
- What state or country do you live in
- Connecticut
Oooh nice set up. So Top down with a 45 inside the container?
For my 2 horizontal tanks side by side there is a 1-1/2" opening on the bottom which i converted to a 3/4" and added a 90 elbow to the two jugs. Heres a little drawing for a visual. I put a question mark at the pipe towards the top of the container because I want to make sure it will circulate since the pipe is Horizontal and no gravity. I can use a 1" pipe with Uniseal for that pipe if that would help.
yeah, this sounds ok. don't forget to ball valve all the runs and add a drain to each container, even the RO/DI so you can get water out of it with have it flowing into one of the salt containers.
OP
OP
ReefCartel
Well-Known Member
My only concern is the 1" pipe to transfer water from Jug "B" back to jug "A". since it cant be gravity fed being a horizontal straight pipe. before i drill the hole, just want to make sure. Also, will the pump out put need to be plumbed into "B" instead of "A"?
143MPCo
ASSIST PROTECT DEFEND
Excellence Award
Photo of the Month
Article Contributor
Moderator Emeritus
Reef Squad Emeritus
- Joined
- May 14, 2012
- Messages
- 6,696
- Reaction score
- 8,295
- What state or country do you live in
- Connecticut
Looks like you're on the flat side with the 1" return, why not normal bulkheads?
both tanks drain into the bottom 3/4" PVC line connected to a tee and then inlet on the return pump, the outlet runs up to another tee that splits off to containers. I would make it all 3/4" PVC and 3/4" NPT bulkheads... if that's the size of the inlet on the return pump?
I think you have a winner...lol
both tanks drain into the bottom 3/4" PVC line connected to a tee and then inlet on the return pump, the outlet runs up to another tee that splits off to containers. I would make it all 3/4" PVC and 3/4" NPT bulkheads... if that's the size of the inlet on the return pump?
I think you have a winner...lol
Last edited:
OP
OP
ReefCartel
Well-Known Member
Wooh THATS IT! lol Perfect
OP
OP
ReefCartel
Well-Known Member
Your awesome lol
143MPCo
ASSIST PROTECT DEFEND
Excellence Award
Photo of the Month
Article Contributor
Moderator Emeritus
Reef Squad Emeritus
- Joined
- May 14, 2012
- Messages
- 6,696
- Reaction score
- 8,295
- What state or country do you live in
- Connecticut
lol, would have replied sooner but, was doing a little welding on a bike frame... sry.
