GSP?

  • Thread starter Thread starter Hetts
  • Start date Start date
  • Tagged users None
I was able to grow all this with stock flex lights
 

Attachments

  • 99AD7B86-7913-4DD5-98B8-BD8791FDE3F8.jpeg
    99AD7B86-7913-4DD5-98B8-BD8791FDE3F8.jpeg
    221.3 KB · Views: 44
I’d like to eventually upgrade the light and get a mesh hood. Do you recommend that light? I don’t want to break the bank
Yes the light works very well once it's set up properly. If you want to keep evaporation down to a minimum and keep the stock hood then the Fluval Marine light bar works well. And I've also added two 12-in 453nm light bars under the Hood from 21ledusa. They have them on for $18 a piece
 

Attachments

  • 20230505_143209.jpg
    20230505_143209.jpg
    86.4 KB · Views: 40
  • 20230505_142955.jpg
    20230505_142955.jpg
    149.4 KB · Views: 38
Yes the light works very well once it's set up properly. If you want to keep evaporation down to a minimum and keep the stock hood then the Fluval Marine light bar works well. And I've also added two 12-in 453nm light bars under the Hood from 21ledusa. They have them on for $18 a piece
Awesome
 
A few are a bit closed up as I just turned the lights on and they were off all night. They usually all fully open back up by lunch time

Nice looking tank!

Good flow, great surface agitation. But it does have a generally dim look. I would suggest that you monitor and lets see how things look in a few months.
 
Nice looking tank!

Good flow, great surface agitation. But it does have a generally dim look. I would suggest that you monitor and lets see how things look in a few months.
Thank you! I’ve had trouble figuring out exactly what way to face my wave maker. Right now I just have it placed at the back glass because pointing it towards middle of tank was just too much flow
 
Thank you! I’ve had trouble figuring out exactly what way to face my wave maker. Right now I just have it placed at the back glass because pointing it towards middle of tank was just too much flow

That power head in a tank that size will provide effective flow no matter where you place it! :face-with-tears-of-joy:

Yes; definitely a good looking tank.

Something to consider; you could supplement existing lighting.
 
That power head in a tank that size will provide effective flow no matter where you place it! :face-with-tears-of-joy:

Yes; definitely a good looking tank.

Something to consider; you could supplement existing lighting.
Could you explain a little more on that? The lighting
 
Could you explain a little more on that? The lighting

Ah... looking back at your pics, I see your lights are enclosed in a hood.

I envisioned a different light, one that is on an arm suspended over the tank. This would make it easier to add another light to the tank across the top.

But with a hood like yours, you're looking at retrofitting, and it probably isn't worth the trouble.

Maybe the best thing to do is stay the course with what you have and if lighting is a clear issue in the future, you can upgrade by eliminating the hood.

I'm curious; what is the temperature in the tank?
 
With the stock evo light, i would not get any corals that need/love lots of light. That is a very basic light. The GSP, Zoas, Leathers, and shrooms would be fine any level in this tank.

The stock fluval lights are not bad. But yeah they won’t put out enough to grow Sps or some more difficult lps.


They can grow sps that don't need 200+ micromols min. Birdsnest, digi, monti cap, etc. are all fine
 
Do you think I’d be fine to put on sandbed? I was looking for a coral that loves lots of light and was told GSP and Zoa’s are a good option. May switch that top rock to zoas and move GSP on sand

Ironically those are corals that are typically called low to moderate light corals at most stores
 
Ah... looking back at your pics, I see your lights are enclosed in a hood.

I envisioned a different light, one that is on an arm suspended over the tank. This would make it easier to add another light to the tank across the top.

But with a hood like yours, you're looking at retrofitting, and it probably isn't worth the trouble.

Maybe the best thing to do is stay the course with what you have and if lighting is a clear issue in the future, you can upgrade by eliminating the hood.

I'm curious; what is the temperature in the tank?
Between 78.6-80.2 most of the time. Drops to 78 at night and gradually rises around 80 through the day
 
Between 78.6-80.2 most of the time. Drops to 78 at night and gradually rises around 80 through the day

Please be careful with the hood; they tend to allow temperatures to elevate in the tank, particularly when you aren't using a sump.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%

New Posts

Back
Top