Thinking of Going T5, Have Some Questions

  • Thread starter Thread starter Shep
  • Start date Start date
  • Tagged users None
I like LEDs and I think they do have advantages over T5 and there are some amazing tanks out there that are run with LEDs but I want to try T5 and decide for myself which I like better.

I'm in the same exact boat. I'm running led with t5 supplement, but I really want to see what t5s can do on their own. Curious more than anything and just want to try something new.
 
I'm in the same exact boat. I'm running led with t5 supplement, but I really want to see what t5s can do on their own. Curious more than anything and just want to try something new.
They do this
b8b9befbc1a78677e2e40be7f76c6ff3.jpg
 
@ATI North America - Thank you for posting the weights of the fixtures. I have looked almost everywhere for that info. Also @ATI North America, I am planning on getting an ATI Powermodule dimmable T5/LED hybrid for my new 120. I know that there is a burn in time for the bulbs before beginning to use the dimmer on them, but I have heard or seen times anywhere from 50 to 100 hours. Can you clear that up for us? Thanks!

The recommended burn in period for ATI T5 bulbs is a minimum of 50 hours at 100% intensity.
 
Getting very tempted to make the switch, so would the 4,6 or 8 bulb unit be best for a 40B?
 
I would say the number of bulbs would be dependent on what you plan to keep in the tank.
This chart will give you the dimensions. 4, 6, or 8 bulb fixtures will physically fit over the tank.

ATIFixtures_zpsmxotximm.jpg
 
I almost wonder is 8 bulbs is too much, the open area above the tank is 17in. The 8 bulb would cover the entire top of the tank........would that be too much?
 
I almost wonder is 8 bulbs is too much, the open area above the tank is 17in. The 8 bulb would cover the entire top of the tank........would that be too much?
Nope. I have a 6 bulb over a 29 gallon and it's great. If you are worried about too much light just throw some bulbs with low par like pure actinic and blue plus
 
Awesome, thanks for the info....plus I guess worst case I could only put 6 bulbs in.
 
Or you could run the 2 bulb channel until the 6 bulb channel kicks on then shut the 2 bulb channel off. And vice versa at end of daylight cycle.
6 bulb light will be plenty but builder is always better.
I run a ATI 6 bulb over a 40b. It's a frag tank with all sps. More than enough light.
 
@Shep for what it's worth I've decided on 6 bulb over 40b that I'm setting for my daughter ( or at least that what I tell my wife).

From talking with local folks over the weekend everyone seems to think 6 bulb will be more than enough. Good to see that mentioned above as well.
 
Awesome, thanks for the info....plus I guess worst case I could only put 6 bulbs in.
Taking two bulbs out won't work because it will need all the bulbs to function. I have a 6 bulb on a 29 (12"wide)and a 6 bulb on a 40b. Six bulbs is enough to keep anything in the 40 but I feel having the 6 bulb on the 29 is beneficial. I'm wishing I had an 8 bulb for the 40. I had a 4 bulb on the 29 for a while and switched to 6 and was extremely happy about it. If it was in my budget to get a 8x39 watt dimmable sun power I would in a heartbeat. Having the extra two bulbs and the option of further customizing the bulb combo would be worth it.
 
Taking two bulbs out won't work because it will need all the bulbs to function. I have a 6 bulb on a 29 (12"wide)and a 6 bulb on a 40b. Six bulbs is enough to keep anything in the 40 but I feel having the 6 bulb on the 29 is beneficial. I'm wishing I had an 8 bulb for the 40. I had a 4 bulb on the 29 for a while and switched to 6 and was extremely happy about it. If it was in my budget to get a 8x39 watt dimmable sun power I would in a heartbeat. Having the extra two bulbs and the option of further customizing the bulb combo would be worth it.
Then 8 bulb it is
 
Taking two bulbs out won't work because it will need all the bulbs to function. I have a 6 bulb on a 29 (12"wide)and a 6 bulb on a 40b. Six bulbs is enough to keep anything in the 40 but I feel having the 6 bulb on the 29 is beneficial. I'm wishing I had an 8 bulb for the 40. I had a 4 bulb on the 29 for a while and switched to 6 and was extremely happy about it. If it was in my budget to get a 8x39 watt dimmable sun power I would in a heartbeat. Having the extra two bulbs and the option of further customizing the bulb combo would be worth it.

On ATI fixtures all bulbs run in pairs with 1 ballast driving 2 bulbs. So long as you take out both bulbs on a single ballast this would work. If you pull 2 bulbs from 2 different ballasts you will have 2 that won't fire as well.

This may be helpful if you are trying to do this:
ATI 24" 4x24W Powermodule T5 High-Output Fixture 1&3 2&4
ATI 24" 6x24W Powermodule T5 High-Output Fixture 2&5 1&3, 4&6
ATI 24" 8x24W Powermodule T5 High-Output Fixture 3&6 1&2, 4&5, 7&8
ATI 24" 10x24W Powermodule T5 High-Output Fixture 3&8 1&2, 4&5, 6&7, 9&10
ATI 36" 4x39W Powermodule T5 High-Output Fixture 1&3 2&4
ATI 36" 6x39W Powermodule T5 High-Output Fixture 2&5 1&3, 4&6
ATI 36" 8x39W Powermodule T5 High-Output Fixture 3&6 1&2, 4&5, 7&8
ATI 36" 10x39W Powermodule T5 High-Output Fixture 3&8 1&2, 4&5, 6&7, 9&10
ATI 48" 4x54W Powermodule T5 High-Output Fixture 1&3 2&4
ATI 48" 6x54W Powermodule T5 High-Output Fixture 2&5 1&3, 4&6
ATI 48" 8x54W Powermodule T5 High-Output Fixture 3&6 1&2, 4&5, 7&8
ATI 48" 10x54W Powermodule T5 High-Output Fixture 3&8 1&2, 4&5, 6&7, 9&10
ATI 60" 4x80W Powermodule T5 High-Output Fixture 1&3 2&4
ATI 60" 6x80W Powermodule T5 High-Output Fixture 2&5 1&3, 4&6
ATI 60" 8x80W Powermodule T5 High-Output Fixture 3&6 1&2, 4&5, 7&8
ATI 60" 10x80W Powermodule T5 High-Output Fixture 3&8 1&2, 4&5, 6&7, 9&10
ATI 24" 4x24W SunPower T5 High-Output Fixture 1&3 2&4
ATI 24" 6x24W SunPower T5 High-Output Fixture 2&5 1&3, 4&6
ATI 24" 8x24W SunPower T5 High-Output Fixture 3&6 1&2, 4&5, 7&8
ATI 36" 4x39W SunPower T5 High-Output Fixture 1&3 2&4
ATI 36" 6x39W SunPower T5 High-Output Fixture 2&5 1&3, 4&6
ATI 36" 8x39W SunPower T5 High-Output Fixture 3&6 1&2, 4&5, 7&8
ATI 48" 4x54W SunPower T5 High-Output Fixture 1&3 2&4
ATI 48" 6x54W SunPower T5 High-Output Fixture 2&5 1&3, 4&6
ATI 48" 8x54W SunPower T5 High-Output Fixture 3&6 1&2, 4&5, 7&8
ATI 60" 4x80W SunPower T5 High-Output Fixture 1&3 2&4
ATI 60" 6x80W SunPower T5 High-Output Fixture 2&5 1&3, 4&6
ATI 60" 8x80W SunPower T5 High-Output Fixture 3&6 1&2, 4&5, 7&8
ATI 24" 4x24W Dimmable SunPower w/ Controller 1&3 2&4
ATI 24" 6x24W Dimmable SunPower w/ Controller 2&5 1&3, 4&6
ATI 24" 8x24W Dimmable SunPower w/ Controller 3&6 1&2, 4&5, 7&8
ATI 36" 4x39W Dimmable SunPower w/ Controller 1&3 2&4
ATI 36" 6x39W Dimmable SunPower w/ Controller 2&5 1&3, 4&6
ATI 36" 8x39W Dimmable SunPower w/ Controller 3&6 1&2, 4&5, 7&8
ATI 48" 4x54W Dimmable SunPower w/ Controller 1&3 2&4
ATI 48" 6x54W Dimmable SunPower w/ Controller 2&5 1&3, 4&6
ATI 48" 8x54W Dimmable SunPower w/ Controller 3&6 1&2, 4&5, 7&8
ATI 24" 1x75W LED & 4x24W T5 LED Powermodule 1&2 3&4
ATI 24" 1x75W LED & 8x24W T5 LED Powermodule 1&2, 7&8 3&4, 5&6
ATI 36" 2x75W LED & 4x39W T5 LED Powermodule 1&2 3&4
ATI 36" 2x75W LED & 8x39W T5 LED Powermodule 1&2, 7&8 3&4, 5&6
ATI 48" 3x75W LED & 4x54W T5 LED Powermodule 1&2 3&4
ATI 48" 3x75W LED & 8x54W T5 LED Powermodule 1&2, 7&8 3&4, 5&6
ATI 60" 4x75W LED & 4x80W T5 LED Powermodule 1&2 3&4
ATI 60" 4x75W LED & 8x80W T5 LED Powermodule 1&2, 7&8 3&4, 5&6
 
Check out the Giesemann Matrixx II from BRS. Nice T-5 Fixture and I prefer it to my ATI powermodule.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top