*What are your ideal reef tank parameters?

  • Thread starter Thread starter jsker
  • Start date Start date
  • Tagged users None
How is your coral growth at that level of Alk? Ca?

Mostly good growth, IMO at least :)
We've had KH at those levels for many years, in many tanks. Had some burned corals when raised the KH a couple of years back. After that I like to stay at 6,5-7,5 dKH.
 
How did they look?
My aquarium is in the boonies and I don't live there so I go to visit off and on so my next visit is this Saturday and I will check water parameters then.
It's safer and better than moonshine, I tell you, one day we'll have an aqua Farm out here. Socal,
 
Last edited:
How did they look?
Finally here's water perimeters

Ca. 410 to 430
Mg 1400 to 1450
Alk 8.5
No3. 10ppm
Po4 5ppb
Salinity. 35.5
Temp. 72
24 gallon DT, 16 gallon canister filter, 16 gallon crush limestone for ph control, ozone coming, NPS corals(dendronephthya), sun corals, NPS gorgonians, and oysters coming too. Also use sulfur denitrator from time to time

20190408_094001.jpg
 
Finally here's water perimeters

Ca. 410 to 430
Mg 1400 to 1450
Alk 8.5
No3. 10ppm
Po4 5ppb
Salinity. 35.5
Temp. 72
24 gallon DT, 16 gallon canister filter, 16 gallon crush limestone for ph control, ozone coming, NPS corals(dendronephthya), sun corals, NPS gorgonians, and oysters coming too. Also use sulfur denitrator from time to time

20190408_094001.jpg
Thank you
 
I don't know what numbers are optimal for my tank. I do try to keep alk at 8.00 & the corresponding Ca & Mg
As @NY_Caveman posted, we are going for an average of what members are really running.
 
Finally here's water perimeters

Ca. 410 to 430
Mg 1400 to 1450
Alk 8.5
No3. 10ppm
Po4 5ppb
Salinity. 35.5
Temp. 72
24 gallon DT, 16 gallon canister filter, 16 gallon crush limestone for ph control, ozone coming, NPS corals(dendronephthya), sun corals, NPS gorgonians, and oysters coming too. Also use sulfur denitrator from time to time

20190408_094001.jpg

You take the sulfur reactor offline? Or you take it off completely and then set it up again later when you need? Doesn’t it take forever to re-cycle? Mine took about 2-2.5 months to begin working (too dang well)
 
Using the ATI essentials program

Ca. 410-420
Mg. 1300-1350
Alk. 7.5-8.0
No3. 10ppm or less
Po4. .08 or less
Salinity. 1.026
Temp. 78
6’ 120 gallon running 3 maxspect ethereal led’s for light.
Par level is 260 - 280 up top, 150 - 180 middle and 100- 150 bottom.
 
You take the sulfur reactor offline? Or you take it off completely and then set it up again later when you need? Doesn’t it take forever to re-cycle? Mine took about 2-2.5 months to begin working (too dang well)
Mines tiny 6"dia x 11". 7-12 days from 20PPM down to 5ppm. Put away till needed. When I restart let for 2hrs flow out(effluent) of 1/4 hose,OVER AIR BUBBLES, then set to low stream, not trickle, no issue for me.

20190223_164835 (1).jpg
 
I tried to follow the redsea recommended numbers but the following numbers are have been stable over the last 2 months so Ill keep them there. Mixed reef 9 months old.

temp. 78
po3 - 10ppm
po4 - 0.08ppm
salinity - 1.025
alk - 10.0 - 10.5
calcium - 440 - 490
magnesium 1350

Everything seems happy so I will keep these going. One thing I have been wondering is why redsea recommends such high Alk when the average of reefers is much lower? Am I wasint money dosing this much Alk?
 
From my research the red sea program is based on getting optimum coral growth. I used there program for a few months in the past with higher alk and calcium Levels and I always had the problem of keeping my levels that high, I used a ton of calcium and all just to maintain. I now keep them at the ati recommended levels which is more like natural sea water and since then the problem went away
 
From my research the red sea program is based on getting optimum coral growth. I used there program for a few months in the past with higher alk and calcium Levels and I always had the problem of keeping my levels that high, I used a ton of calcium and all just to maintain. I now keep them at the ati recommended levels which is more like natural sea water and since then the problem went away
 
From my research the red sea program is based on getting optimum coral growth. I used there program for a few months in the past with higher alk and calcium Levels and I always had the problem of keeping my levels that high, I used a ton of calcium and all just to maintain. I now keep them at the ati recommended levels which is more like natural sea water and since then the problem went away
What are the ATI recommended levels?
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top