Jebao powerheads

[Shooter6]

I'm using a older 3 channel doser, outside of the crappy calibration and lack there of under 10ml dosing, it's ok...

I have the old 4 head doser. Replaced a highend branded one in an emergency when that one **** rhe bed. It's been running for at least 4 years without issue. It can go down to 1ml doses. It's the grey one with touch pad on top. Which one do you have that cannot go below 10ml? A trick to solve that issue is dilute whatever your dosing to the point you have to dose more volume to reach your results. I've done this with trace elements ect in the past.

 

[Lbrdsoxfan]

I have the old 4 head doser. Replaced a highend branded one in an emergency when that one **** rhe bed. It's been running for at least 4 years without issue. It can go down to 1ml doses. It's the grey one with touch pad on top. Which one do you have that cannot go below 10ml? A trick to solve that issue is dilute whatever your dosing to the point you have to dose more volume to reach your results. I've done this with trace elements ect in the past.

It's exactly the model I have, and that's what I do with nopox. Just cut it by 50 percent with RODI. It will go to 1ml, but it doesn't calibrate worth a crap under 10ml or so. Always different time taken to fill the 10ml measurement.

 

[Shooter6]

It's exactly the model I have, and that's what I do with nopox. Just cut it by 50 percent with RODI. It will go to 1ml, but it doesn't calibrate worth a crap under 10ml or so. Always different time taken to fill the 10ml measurement.

I believe to calibrate it, you fill a container with 100 or 1000ml. Then it calibrates the time to fill it and divides the time to calculate the dose. I've never had an issue. Actually I've not calibrated mine for at least 2 years now lol.

 

[Lbrdsoxfan]

I believe to calibrate it, you fill a container with 100 or 1000ml. Then it calibrates the time to fill it and divides the time to calculate the dose. I've never had an issue. Actually I've not calibrated mine for at least 2 years now lol.

I believe it's 100ml, but it's been a bit since I bothered. I just cut my dosing with RODI. Seems to be more accurate over 10ml dosing. Under 10ml it's never right (usually too much).

 

[Dierks]

I have 2 sow22's high flow from them. I'd say close to mp60. They hit the opposite side of my 8x3x2 400g without any difficulty

This is exactly what I wanted to hear! I have to push the water 6' so this is great!