What are you using for circulation?

Use 1.5" sea swirls on reeflo super dart golds for return and closed loop. They create great random flow with high surge in the direct they are pointed.
 
6ft tank. I'm using two MP40QD on either end and two MP40QD on the back wall of the tank. Several different modes used. Always have one of each size pump in anti-sync except when running Nutrient Transport mode a couple of hours each day.
 
Two gyre 130' and a mp40 qd down about 2/3 in the center to mix it up in the bottom. I use the reef link for the mp40 and raising the funds for a new controller to the gyre's
Jsker,
Have you thought about the new Gyre's? Just curious.
 
On my 312g tank i am using a hammerhead pump that is plumbed into two 1.5" seaswirls as my main return and then also two MP40's. Gives me at full flow close to 15,000 GPH
 
Jsker,
Have you thought about the new Gyre's? Just curious.
I dream about the new controller all the time, and I will be purchasing one soon for the 130's. The new heads are basically the same except for the rotors. I have a set of new rotor, that I still need to install into one of the 130's and depending how they work, I will order another set of rotors for the other head that I have. Ready:D:D:D if it is not broken, do not fix it:D:D:D:D:eek::eek:
 
Jsker, how do you like the gyre? I thought about trying It but went with MP10 for my 30g cube. I don't remember the reason my LFS gave for preferring the mp10
 
On my newest setup 120 gallon

2x mag 9.5 return pumps , 2x Jebao RW 8, one maxspect xf gyre 130. I'll soon be adding a little more flow with an additional maxspect xf gyre 130. I also have some smaller pumps in my sump to keep detritus from building up .
 
6ft, 125 gallon running one RW15 and one RW8 controlled by a JB wave. Fed by a Panworld 250 PS from my basement sump.

I just got the JB wave for the jebao's and it truly is a game changer! I could never get them to stay in sync with the stock controllers. I can fully control these pumps now! Very happy!
 
This is awesome! I know there have to be more folks with small to mid-sized tanks.
 
On My SCA 66 gallon (32"x 24" foot print) I run a MP40QD and an MP10QD.

Currently they are ran through a reeflink, but am switching to the WXM module on my apex. I all ready have the module, just need to take the time to hook it up and program it.

The 40 is on the side glass and the 10 is on the back. as the SPS grow and fill in the tank I may add another MP10.
 
I have two Neptune WAVs on a 72" x 24" x 21" tank. I use Mavericks mode most of the day at 90%. I have mostly acros and am noticing a little less flow in the middle of the tank as the acros grow. I will probably be adding on more WAV along the back wall soon.
 
On my 75 Gallon, I run a jebao pp-8 and 2 x rw-4s, thinking on dropping both rw-4s and getting another pp-8.

6ft, 125 gallon running one RW15 and one RW8 controlled by a JB wave. Fed by a Panworld 250 PS from my basement sump.

I just got the JB wave for the jebao's and it truly is a game changer! I could never get them to stay in sync with the stock controllers. I can fully control these pumps now! Very happy!

Awesome to hear. I've been thinking about getting the jbwave. Might just pull the trigger.
 
I (will) run 2 MP10wqds on Reef Crest during the day, about 34-45% (LPS tank) and lagoon mode at night. I also have a tunze return pump putting out about 150gph.

I rock a 40B so I think that qualifies as mid-sized tank? one MP10 is running now at 40% reef crest day/lagoon night and a second is coming in the mail.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top